Home User Tutorial Programming Information for Retevis RT24 Two Way Radio (One)

Programming Information for Retevis RT24 Two Way Radio (One)

by retevis

Retevis company has produced a new two way radio retevis RT24 walkie talkie, Which is 0.5 watt PMR 446 license free radio. Today I will tell you some details information about the how to programming it in the software.

RT24 Programming Software

First, you need to download RT24 programming software on our website:
It use universal driver.you could download it and choose the correct driver compatible with your PC system.

Programming Cable

Second, RT24 compatible with universal kenwood 2 pin standard programming cable, SKU C9018A.
Third, after you install the driver and programming software, connect the radio to the PC by programming cable firmly. Make sure there is no connecting problem to disturb the programming. Turn on the radio, Open the programming software, choose the correct communication port. Read from radio, you will get the information as the picture following;

From this programming page, you could know almost all the information of retevis RT24 radio. Such as the normal functions; VOX, Squesch, TOT, Battery Save, Beep Tone, Language and so on. What people always need to set on RT24 is the Channel table information. For example: TX frequency, RX frequency, CTCSS & DCS, Wide or Narrow band, Scan, TX power, Busy lock, Scramble and Compander.

Retevis RT24 is PMR 446 license free radio, so people no need to set the frequency, just change the CTCSS & DCS, set the scramble function, then it will be good communication without any disturb and there will be nobody could hear the communication details. In order to make the communication clear enough, you could set the compander function, it will keep transmit the voice as original as possible.
After you change the data information, writing it to radio is the last step. Then you could use the programmed radios to communicate with your partners.

Contact Us

Any questions about retevis RT24 two way radio, please send us email at: Support@retevis.com, and kam@retevis.com.

You may also like

Leave a Comment


Phillip Adams 22/10/2018 - 20:57

I can’t find the Programming Software for the RT24 on the CD or on your website would you send me a link

Cherry 25/10/2018 - 10:56

Hello, for the RT24 software, you can download it from our website: https://www.retevis.com/resources-center/
Find the software, then choose model RT24
And please note: this model RT24 is a license-free radio, so we don’t suggest you to program the power, frequencies on the radio.

Peter 02/11/2019 - 03:35


I was very impressed with the Retevis RT24. but I have a question. For me the biggest problem is that the Retevis RT24 does not have beep when press/leave the PTT button also when another person receive a sound, I want to ask if it is possible to activate it in any way? Thanks.

Jim 30/12/2019 - 02:11

Does the rt24 have roger beep function . Thanks

Cherry 31/12/2019 - 10:30

hi, sorry, this model has the roger beep tone

Kirby 01/03/2021 - 15:23

how to activate the roger beep function? neither cant find it in the software nor in the manual…

Elham 23/05/2020 - 20:20

Hi I have looked for the software on the resources center but I cannot find it.

Cherry 25/05/2020 - 10:21

if you want the model RT24 VERSION, you can download here: https://www.retevis.com//resources_center/software/RT24-programming-software.zip

Jim 28/05/2020 - 03:23

Can’t find Roger beep on this model or anywhere in software

Paul Bell 27/09/2020 - 04:48

Is there anyway to programme the radio without having to use a computer at all.

James 28/09/2020 - 10:22 Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy