Home User Tutorial How to Make My Radio Communicate With Others ?

How to Make My Radio Communicate With Others ?

by retevis
795 views

Many customers bought our Retevis walkie talkie , don’t know how to program their walkie talkie and make them communicate with other Brand model analog walkie talkie work together . such as, One customer bought H777 and RT5 ,they don’t know how to make them work together, and today,we will provide some tutorial for u !

How to keep your walkie talkie with other (brand) walkie talkie work together ?

UHF walkie talkie works with UHF walkie talkie,

VHF walkie talkie works with VHF walkie talkie,

Analog mode walkie talkie works with analog mode walkie talkie,

Digital mode walkie talkie works with digital mode walkie talkie .

 

Concrete Program Steps as follows,

1.You have to get one programming cable in hand.

2.Pls log in , https://www.retevis.com/programming_software to download ”USB driver and H777 programming software”

First, Install our “USB driver” version, which support WINDOWS 7/8/XP,not MAC,ipad system. Then install our “programming software”.

3.Pls connect your radio with the cable to your pc.

First, Make sure you got the right cable. second, pls keep the plug connect radio tight. Finally, after everything is set, turn on your radio.

Pls notice, so far, our H777 software has some Chinese character when u installed , but pls don’t worry, that won’t effect ,just a easy step.

Click “下一步” all the time, until u see the “完成” and then, u can complete the software install.

H777 program software

H777 program software (2)

H777 program software (3)

 

 

 

4.Let’s start to write the frequency.

Pls choose right port ,and keep your computer port same as your walkie talkie software.and then, start to read your walkie talkie .

First method:

a walkie talkie :

program frequency

 

b Walkie talkie:

program frequency

 

Pls notice the screenshot red Letter.and keep:

A=G

B=H

C=E

D=F

 

There is another easy way :

A=G

C=E

B=D=F=H

 

5.Write the frequency and save them , u can complete the program.

The above-mentioned is programmed by computer , u can also program your walkie talkies manually.we will refer this tutorial in the future blog. U can also tell us your require and we will solve your problem.

 

Retevis assure you of our best services at all times!

 

You may also like

Leave a Comment

18 comments

Daniel 25/08/2016 - 00:38

I have a RT7 model, and I want to change the channels 9 to 16. I write new values to device, but when I read again, my values are lost, and it shows the factory values.
I change the values on channels 9 to 16, but always returns the factory values. This error occurs for all columns on these channels. Another example; I change the scan column to Yes on channels 9 to 16 and when I read the device, it returns this column on these channels is No.
Please, can you help me? Thanks a lot.

Reply
Zoe Chen 27/08/2016 - 14:01

Check if you click “write to radio” when you finish the programming.

Reply
Rob 21/09/2017 - 12:20

I recently purchased retevis h 777 I was wondering if there is a way to convert the UHF to VHF I have noticed that the frequencies I would like to program into my radio(s) falls within the frequencies that are in the 400 to 470MHz.

Reply
Elsa 05/01/2018 - 16:24

Hello,

Kindly note the frequency range is fixed, can not received UHF to VHF. thanks.

Brgds,
Elsa Jin

Reply
Will Chandler 25/09/2018 - 08:29

Hello,

I purchased the RT-22(set of 4), so that I can use them on the job. We currently use Hytera TC-508U(1); however, there isn’t enough, well many are not working. So, here’s my question, how can I connect my RT-22 to the Hytera?

Reply
Cherry 28/09/2018 - 18:16

Please make the two radios with the same frequeucies and CTCSS/DCS, then they can talk with each other!

Reply
Brian McLaughlin 05/12/2018 - 06:33

Hello: we have older H-777 radios and just bought new RT 22 radios. When the H-777’s are programmed on channel 5 to match the values in the RT 22’s channel 5, the audio sounds distorted and robot like. Any thoughts?

Reply
Cherry 05/12/2018 - 09:58

Could you please send me the two files for H777 and RT22 By email? Our email is kam@retevis.com
We will test them for you to check the question.

Reply
Fabian Bosch 26/08/2019 - 12:55

Hello,
did you find a solution? Thanks!

Reply
Cherry 27/08/2019 - 09:35

hello, would you please tell us your quesiton?
Our email is partner@retevis.com

Reply
Fabian Bosch 26/08/2019 - 12:54

Hello,
could you fix it? I just got the same problem. Thanks!

Reply
IT Support 10/07/2019 - 01:25

Hello what would be the best frequency to program RT7 radios to be used indoor in a 15 floor concrete building?

Reply
Cherry 24/07/2019 - 09:16

Hello, so sorry for the delay reply!
usually use the radio indoor and with the building 15th, There will be interference. We suggest you consider about the repeater.

Reply
JERRID BURKHEIMER 22/08/2019 - 12:26

I have a question. I am not sure where to ask. So, here goes. Is it possible to make a walkie wirk at 8 Hertz?

Reply
Cherry 24/08/2019 - 10:00

sorry, we don’t have the radio in 8Hz BAND,would you please tell me where to use this band radio?

Reply
Marc Valencia 10/09/2019 - 22:44

how do i connect rt22 and rt41?

Reply
John Boatwright 28/12/2021 - 05:55

How do I manually program my Retcvis RT 48. I don’t have access to a computer.

Reply
Cherry 29/12/2021 - 14:46

I am so sorry for this, RT48 should be programmed by computer

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy