Home HAM Retevis RT85 is an entry level amateur Radio!

Retevis RT85 is an entry level amateur Radio!

by James
159 views

For a beginner, an analog radio without a  screen seems too simple for them to learn. Just make two radio frequencies, CTCSS the same then you can communicate with others. It doesn’t have many challenges. So if you want to learn more, Retevis RT85 is very suitable for you!

Retevis RT85 has a DOT-MATRIX LCD display, compared with other models, the display is clearer, you can find its improvements!

Rt85 has Dual-band, dual display, dual standby function, so you can do many setups on the radio and learn how to switch the band and change the frequencies!

And RT85 has a new innovation on the lock, you can you lock the PTT button, keyboard, channels respectively! So when you want to talk to someone, just lock the channel, you can avoid the wrong touch. Also, you can lock the keyboard!

For the most important function: In VFO Mode, you can write the frequency manually, many friends found trouble in connecting to the repeater. If you want to connect to the repeater, you need to get the information about the repeater information, you can gain the information through local radio association! Also, here is a video of how to use Retevis RT85 connect to the repeater:https://www.youtube.com/watch?v=coK78k_bBxg&t=22s

If you have any questions about our product, please email us: partner@retevis.com or leave messages below. Retevis reserves the right of final explanation.

 

You may also like

Leave a Comment

*

4 comments

don January 29, 2021 - 3:29 am

where can I find the programming software for this radio that I am starting to think I wasted 113 bucks on

Reply
Cherry
Cherry February 2, 2021 - 9:28 am

Hi, RT85 you can download here: https://www.retevis.com/RT85-Full-power-FPP-Dual-Band-HAM-Radio#A9195A
click support, choose firmware/software to download

Reply
Bobby March 3, 2021 - 12:08 am

How do you enter VFO mode on the radio? It starts as channel mode and not clear in manual

Reply
Cherry
Cherry March 3, 2021 - 10:47 am

the display need to show the MR mode or frequency mode. Press menu, choose the Diplay mode( menu 33), choose MR or Freq. Then press confirm, then go to the home page, press the button # radio button( short press), it will enter into the VFO mode, please have a try

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy