RT95 is a Dual Band Transceiver Mobile Car Radio, US frequency VHF is 144-148MHz,430-440MHz,and EU frequency VHFis 144-146Mhz,430-440MHz.200 programmable memory channels.maximum power 25W.Today,let us how to programme RT95 mobile radio?
Prepare steps:
Step 1:Please download and install RT95 software in RETEVIS official website https://www.retevis.com/resources-center/
Step 2:Install again the RT95 driver in downloaded RT95 software
Step 3: You need a RT95 programming cable J9129A:https://www.retevis.com/programming-cable-for-retevis-rt95-mobile-car-radio
Step 4: Connect your RT95 with you PC, using progrogramming cable. Note, RT95 need plug power
Step 5: Turn on the radio RT95
Step 6: Choose the correct communication port
(check in computer-device manager) 
Step 7:Choose the correct frequency band(1/3) depond on your demand (US frequency VHF 144-148MHz,430-440MHz,and EU frequency VHF 144-146Mhz,430-440MHz)
Programming steps:
Step 8: Write the date, such as “RX frequency”, “TX frequency” CTC/DCS DEC and CTC/DCS ENC in to the channel one
For example:
RX frequency:146.00000
CTC/DCS DEC: 62.5
TX frequency:430.00000
CTC/DCS ENC: 62.5
Step 9:Click “Write to Radio”. Then all datas will be save to radio.
Visits: 284
Hi, Need to know how to change mode to band 2
Sent email to you, please check.
can you help me to program RT95 on band 2 thanks
Yes, email sent to you. Please check.
Please help Need to know how to change mode to band 2
Email is sent to you, please check!
If any question, please feel free to contact us!
Best regards
Cherry
I also have an RT95 and looking to expand to BAND 2. Please could you send me this info
Hi, Need to know how to change mode to band 2
Dear, have sent email to you, please check.
Please help Need to know how to change mode to band 2/ mail. Borisovevgeny82@mail.ru
Email is sent to you, please check!
If any question, please feel free to contact us!
Best regards
Cherry
Hello, Needing help to change to band 2?
Hi, we have send you an email, please check. Thanks!
Can you forward me the email about band 2? Thanks. wj4eep@gmail dot com
We have sent you an email, please check.
Hi I need to change to band 2 also please
Sent you email, please check.
Can I Program my RT95 without a cable or pc?
Sorry, If you want to program RT95, it is necessary to connect cable to your PC.
Then why sell the product without the cable?
Please find the cable here http://www.retevis.com/programming-cable-for-retevis-rt95-mobile-car-radio
Thanks!
Hi, Need to know how to change mode to band 2
Hi, We have send you email, please check it. Thanks!
Hi, Need to know how to change mode to band 2?
Hi, email has sent to you. Please check and learn how to change mode to band 2. Thanks!
Hello. I bought this radio station. Interested in working at frequencies of 144-164 and 446? How to make?
Hello. Email has sent to you about how to working at frequencies of 144-164 and 446. Please check.Thanks!
Hello. I bought this radio station. Interested in working at frequencies of 144-164 and 446? How to make?
is there any information about RT95 *.dat code-file ?
it’s binary and specific. it works with rt95 programming sw.
rt95 soft is tiny and small. ther ist no export function such as *.csv export.
i need a csv- export/import function to handle rt95 device in ms-excel or
any other soft to do this. CSV impex is basic to go with rt95.
73’s db7ji
I will make a record of your wish list. If we ass exprot/import function, will let you know. Thanks!
Hi, i would like to have this features too, becaus i´m using cvs.files for managing frequency-lists in other programs for other devices.
Hi, Need to know how to change mode to band 2, for 146.625 mhz
Email sent to you, please check.
Hello. I need to set the radio to band 2 for USA UHF amateur frequencies. Thanks in advance.
Email sent to you, please check.
I need the same thing I want be able to communicate to the retevis rt1 uhf please help
Hello. I need to set the radio to band 2 for PMR. Thanks in advance.
Steps sent to your email, please check.
Hi, Need to know how to change mode to band 2
Sent you email, please check.
How do you change the radio to band 2?
Email sent to you, please check.
Si puedo leer la programacion de mi RT-95 y pasarla al PC pero despues no puedo pasarla a la radio, da error de comunicacion (SetComdatabyOptionerror)
ruego me informe que puedo hacer
Please check your computer port.
I have the same issue; my PC’s port works flawlessly (with Chirp I can program without issues).
Any hint to solve this problem?
Need to change band frequency limits to USA band plan.
Hallo
How can I get Roger Beep on end my TX
I purchased the Retevis RT95 and am wondering if I can change the default settings to Band 2. I am trying to program the radio for the US Amateur 70 centimeter band. It needs to go to 448 Mhz. Thank you
How do you change the radio to band 2?
Hello, Where can I find the last firmware for RT95 ?
Thanks
Hi, RT95 is the analog mode mobile radio, so there is no firmware for it, only the digital radio has the firmware!
Please note!
Hey, can u help me please, how to change to band 2 ? thx
Hi,
Can I get instructions to change bands.
Many Thanks
Hello, how do you disable dual watch, only want to monitor on channel / frequency, thank you
HOW CAN I CHANGE TO BAND 2
I bought it from retevis official seller. incl cable. But i can only READ from radio, when i try to WRITE it says ERROR. Just want to change to band 2
Hallo ich möchte bei retevis rt 95 die freqenzen erweitern wie z.b die freqenzen 136-174 mhz wie soll ich das machen bitte um gesamte anleitung danke bitte um schnelle antwort
Can channels be programmed manually without the cable?
If you travel and can’t add and save stations on the fly, it’s not really that useful.
hi, we are so sorry for this, this model can not be programmed by its keypad, if you want, you can try the handheld radio Ailunce HD1
I bought it from retevis official seller. incl cable. But i can only READ from radio, when i try to WRITE it says ERROR. Just want to change to band 2
HELP!!!!
hi, i am so sorry for this, your radio model is RT95?
when you try to wirte, which error information? if you can make a screenshot, it will be helpful for us to know more abour your problem.
if possible, you can email me: partner@retevis.com
Best regards
Cherry
After the transfer to band 2, it worked. Thanks.
thanks, if any question, please let us know!
best regards
Cherry
How to configure a repeater on RT95 for UHF
hi, first you need to know the repeater’s transmit frequency and Receive frequency, and also the ctcss/dcs.
Then program your RT95 with the converse value. For example of the repeater information:
Tx frequency: 433.1250mhz no ctcss/dcs code
Rx frequency: 423.1250mhz no ctcss/dcs code
Then your RT95 mobile radio setting:
Tx frequency: 423.1250mhz
Rx frequency: 433.1250mhz
If any question, please contact with us!
Best regards
Cherry
Hi, Need to know how to change to export mode / to band 2 My mail : ludovic.fimbel@gmail.com
sent to your email, please check!
Hola! Existe algun circuito para conectar esta radio a la pc y poder trabajar con sstv, ft8, etc?
Hi, which cable do you want for RT95? If you want the programming cable for RT95, you can check this one: https://www.retevis.com/programming-cable-for-retevis-rt95-mobile-car-radio/
Need band 2 for rt95 plus software link
https://www.retevis.com/RT95-Dual-Band-Transceiver-Mobile-Amateur-Radio/#A9129Z-US
CLICK THIS, THEN “SUPPORT” THEN “FIRMWARE/SPFTWARE”
hi just bought 2 retevis rt95 set it up worked ok turned it of all iam getting it saying put input password in the radio you turn power of with power button plus the function button wont work waiting retevis to get back to me with another radio or a refund 97 pounds stirling so as any one else had the same probelm is it a fault or dose anyone no the password or any ideas what to do cheers dennis manchester uk