Home User Tutorial How to programme RT27 in software

How to programme RT27 in software

by Julia
1,000 views

How to programme RT27 in software

Retevis RT27 is one kind of license-free business Analog radio. It meet USA, EU, Canada license-free frequency standard.

1.RT27 license-free 22 CH FRS 12.5KHz 0.5W/2W Handheld Two Way Radio—-USA Frequency Standard
2.RT27 license-free 16 CH 0.5W 12.5KHz PMR446 Handheld Two Way Radio—-EU Frequency Standard
3.RT27 license-free 16 CH FRS 12.5KHz 0.5W Handheld Two Way Radio—-Canada Frequency Standard

 

Now let’s we check how to programme RT27 by software.

Same Retevis radio model no. is with same default settings.
For new RT27, just switch the new radios in same channel, they can communicate directly.

Programme RT27 when you need make some changes:

Step:1 Please download and install RT27 USB driver (USB Universal Driver) in RETEVIS official website https://www.retevis.com/resources-center/
Step 2: You need a programming cable C9018A
Step 3: Connect your RT27 with you PC, using programming cable.
Step 4: Turn on the radio RT27.
Step 5: Now we come to RT27 software interface

Step 6: Choose the correct communication port
(check in computer-device manager)
Step 7: Click” Read from Radio” in “Program” Column
Step 8: Write the date, such as  QT/DQT Dec and QT/DQT Enc  into the channels
For example:
RX frequency:462.56250
CTC/DCS DEC: 127.3
TX frequency 462.56250
CTC/DCS ENC: 127.3

(Note: the RT27 is license-free radio, so the frequency can’t change, just can set up QT/DQT data.)

When u always can hear other radio noise, u can change the CTCSS/DCS(QT/DQT).

Finally Step 9: Click “Write to Radio”. Then all dates will be saved to radio.

Need know more about RT5R? Please feel feel to write to us. vip@retevis.com, thanks.

You may also like

Leave a Comment

*

23 comments

Phillip February 28, 2020 - 11:11 pm

Is it possible to program the rt27 and rt27v with Chirp?

Reply
Cherry
Cherry February 29, 2020 - 11:22 am

sorry, now the chirp software doesn’t suppport the model RT27 and RT27V, if you want to program, you can download from our website: https://www.retevis.com/resources-center/

Reply
JD May 8, 2020 - 2:41 am

Is it possible to deactivate four channels so just one is available? I only need one channel without my family bumping the knob to a different channel.

Reply
Cherry
Cherry May 8, 2020 - 4:57 pm

Hi, would you please tell me which model do you use? The RT27V?

Reply
JD May 9, 2020 - 5:39 am

Yes I am considering the RT27V five channel MURS model.

Reply
JD May 11, 2020 - 9:59 am

Yes, considering a VHF Murs, RT27V.

Reply
Cherry
Cherry May 13, 2020 - 2:33 pm

We are so sorry for this, there is no solution to help you fix the frequency, because this radio only have 5 channels

Reply
JD May 19, 2020 - 5:27 am

What about activating Scan and only choose ADD on one channel and REMOVE on the other four channels of the RT27V?

Cherry
Cherry May 19, 2020 - 4:53 pm

Hi,
if you want to active the Scan, you need to at least chose 2 channels

Ray May 22, 2020 - 2:38 am

I can’t find the RT27 programming software on your website. Where can I download it?

Reply
Cherry
Cherry May 23, 2020 - 9:01 am Reply
N July 9, 2020 - 11:05 am

Hello,
I was wondering if you have a link, to the programming software, for the
RT27V MURS radio, I can’t seem to find it on your website?
Thanks!

Reply
James
James July 9, 2020 - 2:04 pm Reply
N July 10, 2020 - 5:30 am

Hi James,
I searched as you indicated and there was no link to the software.
Is there another link to get the software?

>>>
“HELLO! YOU CAN HAVE A LOOK AT THIS!http://blog.retevis.com/index.php/how-to-download-software-from-retevis/

>>>
“Hello,
I was wondering if you have a link, to the programming software, for the
RT27V MURS radio, I can’t seem to find it on your website?
Thanks!”

Reply
James
James July 10, 2020 - 8:17 am

Click the “support”, then click “firmware/software”https://www.retevis.com/RT27-FRS-or-PMR-License-free-Portable-Walkie-Talkies/#A9133D

Reply
Kenneth August 12, 2020 - 11:19 pm

Hi, This link is broken or no longer exists….https://www.retevis.com/resources-center/ can you advise? I purchased 3 RT27V MURS 5 channel radios and
I’d like to know more about them and about firmware and/or programming updates etc.
I also have an Ailunce HD1 dual band DMR radio and I’m very pleased with the customer/produce support for that radio.
Thank you,

Reply
James
James August 13, 2020 - 9:07 am Reply
Kirk Reid September 24, 2020 - 1:25 am

I have a set of 5 RT27’s. One radio has stopped receiving but transmits perfectly.
Any idea’s?

Reply
James
James September 24, 2020 - 3:33 pm

Hello!
1. When did the radio fail to receive it?
2. Are the CTCSS settings of the walkie-talkie right?
3. The transmission is normal, can the other radio receive normally?
4. What response of indicator when receiving?

Reply
Andrew October 17, 2020 - 1:33 am

Can I program RT27V 5 channel to work with 22 channel radios?

Reply
James
James October 17, 2020 - 10:35 am

Hi, dear, very sorry for the delay! for MURS radios and FRS and PMR radio, they have different frequency section, we will send you a file, please have a try and have a nice day!

Reply
Gaetan Blanchette August 4, 2021 - 9:00 am

Hello, We bought 60 Retevis RT27 and we already have 100 Baofeng UV-5R, the problem we have is when we speak in the rRetevis we hear in Baofeng, but when we speak in Baofeng we hear nothing in the Retevis … what is the solution ??? please

Reply
Cherry
Cherry August 6, 2021 - 11:04 am

hi, please check the CTCSS/DCS.
if you want the analog mode radios talk with each other, you need to make the CTCSS/DCS codes same. Or You can off the codes.

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy