Home User Tutorial How to program RT3S by PC software

How to program RT3S by PC software

by James
519 views

Program RT3s radio by pc software is a basic operation, it will make your communication more easily. Today we will take the RT3s as an example to introduce how to program through programming software.

RT3S dual band digital radio uses Digital Mobile Radio (DMR) Tier 2 Standard protocol. If you want to know more about RT3s, please click this link:RT3s

How to program your RT3S radio By PC?

1. We need to download the programming software of RT3s  from our website. Choose your model and download corresponding software.Where to download the RT3S software?

 

2. Download and install the programming software.

RT3S programming software

3. Before you open the software, please turn on your radio and connect your radio to your computer by program cable.

4. Open the software and find the “read” option to read frequency, which makes sure your information wouldn’t lose.

5. Then, click the ” Channel Information” option and program. The range of frequency of RT3s is from 136 to 174 and from 400 to 480. Please make sure you don’t out of it, otherwise, you can’t be successful.

4. After you finished, click”write to the radio”.

If you have some problems, you can refer to this article: Some Simple Problems when programming radio

If you have any question about that, please leave messages or email us: Partner@retevis.com

 

You may also like

Leave a Comment

8 comments

Joe 6月 20, 2020 - 2:58 上午

The link in this article does not work. https://www.retevis.com/resources-center/ Is there another link that should be used?

Reply
Cherry
Cherry 6月 20, 2020 - 8:14 上午

hi, you can go to the product page, to choose SERVICESUPPORT-Firmwware/software to download

Reply
Gordon Kelly 6月 21, 2020 - 10:05 下午

What has happened to the software download page not very good if your trying to sell radios but cant program them

Please fix this problem as it reflects on your good company name

Reply
Cherry
Cherry 6月 22, 2020 - 10:44 上午

Hi, we have updated our website, if you want to download the software, you can read this blog, hope can help you:
https://blog.retevis.com/index.php/how-to-download-software-from-retevis/

Reply
Inigo Boco 7月 14, 2020 - 7:48 下午

there is no ” SERVICESUPPORT-Firmwware/software to download ” on the product page. please check your product page for this info

Reply
Joe 9月 18, 2020 - 2:22 下午

Many thanks

Reply
philip hughes 11月 15, 2020 - 12:24 下午

hi anybody footprint for Australia uhf CB 80 channel
and others

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy