Home User Tutorial How to download software from Retevis?

How to download software from Retevis?

by Cherry
2607 views

Download software from Retevis? Don’t know how to do? Please read this blog:

Retevis.com updated the wesbite, and now the page resourse-center doesn’t work. And we have added the programming software to each product page.

The steps:

1, Fill the model  you want to download in the search box, then press enter button.

For example, the model RT22.

2, You will enter into the RT22 Related product page, like the below picture:

3, Find the model You want.

Here we choose RT22, click model RT22, enter into the RT22 product page. Click the menu Servicesupport.

4, Choose the firmware/software, download here:

5, Programming your radio RT22 via the software.

 

Done! Very easy!

If you have any question about this. Please comment below or email us: Partner@retevis.com

You may also like

Leave a Comment

*

105 comments

David July 1, 2020 - 8:24 pm

I have a RT-95
why is that not on the list?

Reply
James
James July 3, 2020 - 9:17 am

Hello! here is the link for your RT-95! Please. You can click the “support” and chose firmware/software” to download the software!https://www.retevis.com/RT95-Dual-Band-Transceiver-Mobile-Amateur-Radio/#A9129Z-US

Reply
James
James July 9, 2020 - 9:21 am Reply
Ray Edwards October 20, 2020 - 1:44 am

Your zip file for the RT619 is corrupt and the software cannot be extracted, can you replace it please

Reply
Doug Radcliffe July 8, 2020 - 8:47 pm

Please, I have 10 retevis 22’s. They have been great except they have a button that goes bad quickly on them. I’m looking at replacing them now that they are well worn. The thing is, I need them to be louder. My hearing is not great and I find myself in high noise environments a lot. What are your loudest models.

Reply
James
James July 10, 2020 - 11:43 am

hello! you can do those things:
1:check the battery quality.
2:is the sound button on its maximum.
3:make sure the sound of the other party’s walkie-talkie is low!
4:long distance will lower the voice.
5:big buildings, basements will have influence.
if any questions, you can contact us. thanks!

Reply
marcelo gonçalves July 8, 2020 - 10:50 pm

preciso do programa do rt 84

Reply
James
James July 9, 2020 - 8:37 am Reply
Michael July 23, 2020 - 6:08 am

Hi.
Can not find RT22 in product list.
Can you get a link to download program?
Thanks.

Reply
James
James July 23, 2020 - 8:17 am Reply
Michael July 23, 2020 - 2:10 pm

I can’t find RT22 here https://www.retevis.com/amateur/

Reply
KB2JDB July 28, 2020 - 1:38 am

RB-18 license free is pre-programmed with FRS and GMRS channels. Only TONES can be changed.
Looks like the radio cannot be re-programmed to Amateur Radio frequencies, like most other RETEVIS HT can.
Am I missing something, as the radio was described as programmable.
Thanks

Reply
James
James July 28, 2020 - 8:41 am

Hello! do you want to change the frequencies to Amateur radio frequencies?

Reply
KB2JDB August 13, 2020 - 11:20 am

Yes. I am a licensed radio amateur with callsign KB2JDB. My other Retevis radios are sold as FRS but can easily be re-programmed with amateur frequencies in the 400-470 MHz range.
Please advise.
Thank you!

Reply
James
James August 18, 2020 - 10:25 am

Hello! sorry for the delay. can you tell me which model of the radio?

Reply
Joe Claus September 2, 2020 - 3:09 am

Model is RB-18. Want to program with amateur radio frequencies…

James
James September 2, 2020 - 11:17 am

Hello! RB18 is a license-free radio, can we know why you want it to do amateur radio frequency? Thank you very much!

Bob August 12, 2020 - 11:52 am

Hi trying to download RTS 3 software I am getting a bad download on everything
also what us default password code on the RTS 3 ?

Reply
James
James August 12, 2020 - 6:11 pm

Hello! do your radio have GPS OR NOT? and can I have your e-mail? we will send you a video.

Reply
Robert Charles Smyth September 3, 2020 - 9:12 am

RT22S software will not install on Windows 10. I even tired running all the different compatibility modes.

Reply
James
James September 5, 2020 - 2:28 pm

Hello! Did you check the security software protecting your pc, so it stoped the setup of the software of RT22S, could you please use your friends’ pc and try again? thank you very much!

Reply
Joseph Claus September 5, 2020 - 9:16 am

Hi amateur radio operators are free to use any equipment we want as long as we comply with band and signal purity requirements. I have re-programmed several hand held Radios that I bought. They had either odd frequencies and tones from China or FRS frequencies.
I was easily able to install US amateur frequencies in our UHF band.
Your RT-15 is an example of a radio that is easily reprogrammed. Your advertisement said the RB-18 radios could be programmed, but I learn that only tones can be changed.
I’m not sure why the standard FRS and GMRS frequencies that were present in the radio were matched with strange, random tones.
Your RB-18 radio cannot talk to any other FRS radios.
Please tell me if the RB-18 frequencies can be re-programmed. It’s a nice looking FRS. I have several of them. I really wanted to program it to be a really cool looking amateur radio transceiver.
Thanks, Joe

Reply
James
James September 5, 2020 - 2:26 pm

Hello! RB18 is a license-free radio, can we know why you want to change the frequencies?

Reply
Joe September 7, 2020 - 10:02 am

Hi, Jamie. We radio amateurs use hand held radios for more than person-to-person. We can use repeaters and even listen to signals from the International Space Station.
That is why we like to modify radios to our needs.
If the RB18 radio frequencies cannot be changed please say so.
If the radio can be reprogrammed please tell me what software or how to do.
I like Retevis radios. Some can be reprogrammed and some cannot. Tell me about the RB18.
Thanks, Joe

Reply
Joe September 10, 2020 - 2:20 am

Hi, so I can use it on amateur radio frequencies, just like I did with the earlier RB-15.
I thought if the RB-15 can change frequencies, why not the RB-18.
Nothing sinister here…we ham radio operators can freely adapt equipment to our use.

Reply
James
James September 10, 2020 - 11:51 am

We will send you a file about this.

Reply
Joe Claus September 12, 2020 - 9:16 am

Thank you! You sent the XML files to program the RB18 radio. I figured out how to modify XML files for ham radio frequencies.
With your help I was able to re-purpose another fine Retevis radio, and learned about XML files, too!
Thanks James and Retevis. I will purchase another radio, I’m certain!

Reply
Michael G Gingras October 2, 2020 - 11:48 pm

Programming RT22. I have the correct programming cord and downloaded the software you link to. The computer recognizes the cord but the program is not finding the radios. Can you help?

Reply
James
James October 6, 2020 - 4:31 pm

Hi, dear, very sorry for the delay! we have send you a file by e-mail, please have a try and have a nice day!

Reply
Ched October 6, 2020 - 3:23 am

Hello,

I downloaded and installed the RT22 software version 1.05. I’m having issues reading from and connecting to my RT22. The exact message is “Cannot connect the radio.” Below are a few things that I have tried.
• Restarting my computer
• Tried different RT22 radios (I have 6 total)
• Tried different USB ports on my computer
• Confirmed that I’m using the correct COM port via Device Manager
• I can connect to my radios using (old) version 1.00 of the RT22 software

Please advise on further steps. Otherwise, where can I download version 1.00 of the software?

Reply
James
James October 6, 2020 - 4:23 pm

Hi, dear, we have sent you a file about it

Reply
Jackson Barrett May 19, 2021 - 4:17 am

Is there a way I can get that file emailed to me as well? I have the same exact problem

Reply
MEGAN Purtell October 7, 2020 - 11:48 pm

The site doesn’t show any information to download the software under RT22. The support section is empty.
https://www.retevis.com/RT22-RT622-small-pocketable-License-free-radio/#A9121G

Reply
James
James October 8, 2020 - 2:09 pm

https://www.retevis.com/RT22-RT622-small-pocketable-License-free-radio/#A9121G, hi, dear, very sorry for the delay, please try again, many thanks

Reply
mr raymond houlton October 8, 2020 - 3:48 pm

Hi

What is the password for retevis RT619 download from radio

Ray

Reply
James
James October 9, 2020 - 3:00 pm

Hi, dear, did you set a password for it? if not, could you please skip that step? please have a try and have a nice day!

Reply
Jordan November 2, 2020 - 9:11 am

RT3S will not accept programming. Firmware P018.016 / CP V01.03
Software sees and reads the unit, but unable to write back to the unit.
Please HELP ASAP!!

Reply
Martin November 2, 2020 - 11:27 pm

Hi, I purchased a set of RT616’s and use them in The Netherlands. I recently purchased the official “Original USB Programming Cable for RT16 RT616”.
I downloaded and installed the software (RT616_softwareV1.0.zip) under Windows 10 on my laptop. Connection via COM4 is being made but when I try to do an import (Read from handset ) I get an error after I see the Read – Progress 0 -> 96% process. The error reads: “Unhandled exception has occurred in your application. … Index was outside the bounds of the array.” Also lots of debug details available.
How can I fix this ? I’m now unable to use the software.

Reply
Martin November 3, 2020 - 7:41 pm

Hi, via a factory reset question in the how-to-do-retevis-radio-factory-resetting blog I received the correct programming software for the RT616. Seems the software on the download site is wrong. When unpacked and installed is looks the same as the RT16 software. For me it is working now. Thanks.

Reply
Daniel December 12, 2020 - 8:28 pm

Hi, I have the same radio (RT616), unfortunately Retevis’s website has not been updated with the correct programming software (it still links to the RT16 one). I tried to ask on another blog post for the correct package but I did not receive any answer. Would it be possible for you to upload the software somewhere so the rest of us can program their radios?
Thank you!

Reply
Cherry
Cherry December 14, 2020 - 10:18 am Reply
Daniel December 18, 2020 - 9:44 pm

Hello,
it seems that the download link from that page is wrong. Both the zip file for RT16 and the one RT616 contains the package for RT16, which is unfortunately not compatible with the RT616.
Could you please update the package with the correct installer for RT616?
Thank you!

donna November 14, 2020 - 11:28 pm

can you tell me how to get a programming tools downloaded for rt51, will these instructions only download on windows or can be done on mas iOS also, i have been trying for several days to get my radios working with no luck whatsoever, i added both my devices succefully on portal but that it

Reply
James
James November 16, 2020 - 3:07 pm

Hi, dear, very sorry for the delay! I will send you a file, please have a try and have a nice day!

Reply
James
James November 16, 2020 - 3:10 pm

Can only be downloaded on Windows, 1. This machine reads the account password, and the customer can also change the account password.
2. Log in to the three-level account management platform, add a device (the device you use), and fill in the account password the same as the account password of this machine.
3. Then use this account password to log in to the walkie-talkie device and it can be used normally
This is the account number and password that can be identified from the walkie-talkie. write this down,
then. The account and password for logging in to the webpage are provided by us. Customers can log in to view their own account information. The user name, account and password inside can be changed (ensure that the account and password are consistent with the account and password read in the machine ).

Reply
Petr Majer
Petr Majer November 20, 2020 - 10:25 pm

Hi,
I have trouble with programming RB618.
I used “read” button in the software, everything works well. I modified some DCS codes and then used “write” button to update RB618 configuration. On the PC side everything seems ok, but from this moment RB618 lost all channels and speaker produces strange sound.
When I try read configuration to the PC again, all channels are empty. Is there a simple way to fix this problem?
Petr

Reply
James
James November 24, 2020 - 9:26 am

Hi, dear, very sorry for the delay! Can we know where you bought them and your order id? Thank you so much and have a nice day!

Reply
Petr Majer November 24, 2020 - 9:49 pm

Hi,
I bought at Aliexpress, Retevis official store:
Order No: 8119579663128905
Order Closed: 24 Nov 2020 05:27
Seller: RETEVIS Official Store
I found help on the internet, one man has the same issue with RB618, he bought RB at retevis eu. Yours software has a bug, so I hope you will fix it soon. Shortly once more: try to read data from RB618 and imediately write data back to device. Device will loose all channels and is unusable. There is a trick, how to fix the device. It is complicated and not easy to describe.
Petr

Reply
James
James November 25, 2020 - 9:48 am

Hi, dear Petr, please send your order id and problem to ali-express@retevis .com, our customer service will contact you as soon as possible! Stay safe and have a nice day!

Reply
Petr Majer November 26, 2020 - 1:40 am

I dont need to contact customer support. My device is working already. This is information for development department or other technical staff from Retevis to fix this problem. If you can, forward it to them.
Petr

James
James November 27, 2020 - 2:40 pm

Ok, I will consult our technical support about this problem. Thank you so much for your support and have a nice day!

Janusz May 10, 2021 - 11:20 pm

Cześć, czy rozwiązałeś swój problem? Mam taki sam, proszę odpowiedź jak sobie z tym poradziłeś?

Reply
Antonio November 25, 2020 - 4:35 pm

Hello, I would like to ask if it is possible to have access to the PLAY STORE to be able to install a new APP on my RETEVIS RT-70 Thank you

Reply
James
James November 27, 2020 - 6:07 pm

Hi, dear, very sorry for the delay! I will have a consult to our technical support. And could you please e-mail us at support@retevis.com? Thank you so much and have a nice day!

Reply
Bidoli Alberto December 5, 2020 - 5:16 am

ho il modello RT87, ma non funziona il collegamento via cavo con il software, il cavo viene riconosciuto, ma non comunico con la radio anche se accesa mi da errore e prima chiede la password, che non conosco…. mi potete aiutare?

Reply
israel December 8, 2020 - 5:37 am

the box where to edit channel freq. is grayed out for me and i cant change the numbers.

Reply
Cherry
Cherry December 8, 2020 - 5:09 pm

hi, I think your radio is the license-free radio right? If yes, as the rule,the license-free radio can’t be programmed the frequencies, please understand!

Reply
Enrique December 12, 2020 - 2:06 am

Hi, rt619’s software there isn’t, please can you send it me?, I need vox enable

Reply
mike December 17, 2020 - 5:59 am

need software for h777 and h777s so i can program them to work together

Reply
dhoni ganeswara December 23, 2020 - 2:10 pm

i need software programming for my rt98v. i cant get if from this site because the chapca is allways erorr. please send it by my email

Reply
Sergio Zazzera December 24, 2020 - 5:10 pm

Hi I can’t download the software for rt619. You sent me a copy by we transfer but it doesn’t work. I get an error in the installation “launcher error Unable to open the archive file”

Reply
Cherry
Cherry January 5, 2021 - 9:06 am

hi, please download the software again from our website.

Reply
William December 26, 2020 - 6:37 am

Hi,

I downloaded and installed the RT622 software version 1.05. I’m having issues reading from and connecting to my RT622. The exact message is “Cannot connect the radio.” when tried on the desktop computer. Same message on the laptop but also the communication port cannot be change, it automatically goes back to COM1 for some reason (on the laptop only). Below are a few things that I have tried.
• Restarting my computer
• Tried on both a my laptop and desktop computers (both on Windows10)
• Tried different RT622 radios (I have 2)
• Tried different USB ports on my computer
• Confirmed that I’m using the correct COM port via Device Manager

Reply
Cherry
Cherry January 5, 2021 - 9:02 am

Hi, would you please offer your Order ID and which platform you ordered? Then the corresponding sales will contact with you.

Reply
Kylee Noneya January 5, 2021 - 11:23 pm

How do I turn off the VOX settings on my RB15 Radios. I want only to use PTT to pick up voices.

Reply
Cherry
Cherry January 6, 2021 - 2:06 pm

Hi, please press the menu button, when the display show icon ivox, then choose off

Reply
Kerry Fuller January 10, 2021 - 7:30 am

hello i have a RT5 im trying to program it to pick up local ems and scanner traffic

Reply
Cherry
Cherry January 18, 2021 - 4:22 pm

Hi,
we are so sorry, I don’t know your local ems and traffic frequency, you can have a try to program it.

Reply
Kerry Fuller January 11, 2021 - 8:40 am

i need help programming MY rt5 no downloading softwear

Reply
Cherry
Cherry January 11, 2021 - 11:32 am

hi, please download RT5 software here: https://www.retevis.com/RT5-High-Power-FPP-Dual-Band-HAM-Radio
Click support, find firmware/software to download

Reply
Juan Heruiz January 14, 2021 - 2:31 am

Hola buenas tardes. Tengo una pareja de RT28 y funcionan muy bien . los uso en el trabajo y son perfectos. Mi consulta es que un compañero mio del trabajo se a comprado una pareja de los mismos RT28 y quiero programarlos con mis mismos ctcss/dcs. la cuestion es que los programo igual que los mios y en el unico canal donde tengo insertado codigo ctcss (canal 3 , frecuencia 446.03125 con ctcss decoder – encoder 94.8). que es la frecuencia del trabajo, a la hora de transmitir con ellos, en los mios no se oyen a no ser que tenga pulsado la tecla moni. e mirado toda la configuracion, (funciones opcionales y editor de canales) y estan identicos. incluyendo el mismo squelch (2) y no hay manera. me pueden ayudar? gracias

Reply
Cherry
Cherry January 18, 2021 - 4:22 pm

hi, usualy for analog mode radio, just make sure the frequencies and CTCSS/DCS CODES are same,then they can talk.
So here we suggest you to check all the settings, the Code and decode.

Reply
luis January 23, 2021 - 11:27 pm

Greetings! The link to download software (or manuals) for the RT27V MURS does not work! Is this model programmable?

Reply
Cherry
Cherry January 25, 2021 - 9:18 am

Hi, RT27V is the MURS BAND radio, with the 5 fixed MURS frequencies .

Reply
Scott Schade January 24, 2021 - 4:06 am

looking for RT83 programming software

Reply
Cherry
Cherry January 25, 2021 - 9:17 am

Hi, click here to download the software:https://www.retevis.com/RT83-Color-Screen-IP67-Business-DMR-Radio-Built-in-GPS#A9141A
choose support-firmware/software

Reply
PAUL HARVEY January 29, 2021 - 11:51 pm

Hi
Anyone searched recently for the RT9000d software? Been to the product but nothing under support. Any ideas please?
P Harvey G0RLA

Reply
Cherry
Cherry February 2, 2021 - 9:27 am

Hi, you can download here: https://www.retevis.com/RT9000D-UHF-High-Power-Mobile-Radio-Car-Ham-Transceiver
click the support, choose firmware/software to download.

Reply
John sickles April 5, 2021 - 10:59 am

I have tried twice downloading,then uninstalling and downloading again,computer still will not recognize radio.
I’m done too many issues with these radios!

Reply
John Arnold January 30, 2021 - 6:19 am

I am trying to find the software for the RT47V but cannot find it. Need it to adjust the squelch, vox and tones. Realize the frequencies are not changeable. The blog and every other reference ddoes not show it. It is referenced in the manual multiple times. Thanks

Reply
Cherry
Cherry February 2, 2021 - 9:26 am

hi, you can download here https://www.retevis.com/RT47V-MURS-Handheld-Rechargeable-Waterproof-Two-Way-Radios
click the support, choose firmware/software to download.
And teh frequencies can’t be changed, because they are the MURS band license-free radios.

Reply
Nichole February 7, 2021 - 2:25 pm

So I cannot figure out how to download the software for the Retevis RT-5R!!!! Can someone please help? It did download but when I go to extract it, it says it “path does not exist”

Reply
Todd Werner February 18, 2021 - 7:14 am

Justbought 2 new RT5’s the firmware nor the software will work .says the ocx files are corupt

Reply
Mike February 25, 2021 - 3:38 am

Just received new RT95 with programming cable directly from Retevis and I’m having problems connecting radio to PC (Windows 10). After making sure COM port matched with Device Manager port and try to read from radio I get a message that says Model Type is Wrong and that Read Data Failed. The programming cable appears to be working properly according to Device Manager. The firmware listed for the radio is V1.10. The radio will accept freq. information by manual input only so radio appears to be working correctly so maybe a problem with the RT programming software? Also, in CHIRP, I get a message that says Radio Version not in Allowed List. So maybe the firmware version hasn’t been added to the RT software or CHIRP yet. I don’t know so any help would be appreciated.

Reply
stefano March 14, 2021 - 4:08 am

download software rt24? please

Reply
John March 15, 2021 - 4:38 pm

How can I find out the tone codes for my Rt 27v? I want to be able to link with ither MURS other radios.

Reply
Cherry
Cherry March 16, 2021 - 3:20 pm

hi, you can check the code from the software, use the programming cable to connect with pc, and open the software to check

Reply
Marc Montour March 28, 2021 - 5:04 am

Hi! I just received my two RB618 FRS/GMRS radios, and found the programming software on your web site as per this blog. My radio connects easily with the application, but only 16 channels are displayed out of the 22 available on the devices. I live in Canada, and I should be able to operate all 22 channels here, as in the USA. How can I get the software (RB618_programming_softwareV1.1.0) to recognize and prrogram all 22 channels on those radios?

Reply
Marc Montour March 29, 2021 - 1:03 am

Hi Petr, I experienced the same problem with the software reading my device data, then whiping it out. My radio is stuck on channel 1 and emits a tone at 1502Hz. It is rendered useless. You seemed to have fixed the problem using a complicated solution: Can you please send me info about this fix at marc.montour@sympatico.ca . Best regards!

Reply
Janusz May 10, 2021 - 11:24 pm

Cześć Marc, mam ten sam problem. To chyba błąd firmy w oprogramowaniu. Jak sibie z tym poradziłeś?

Reply
Laurent March 31, 2021 - 6:22 pm

Hello, recently acquired a RT668 because it was listed VOX compatible, but the manual says that this function must be activated through software. Where can I get this software and do I need special cable to use it ?

thanks and best regards

Reply
Cherry
Cherry April 1, 2021 - 4:34 pm

Hi, you can download the software from here: https://www.retevis.com/RT68-FRS-Business-Radio
Click support-firmware/software, choose RT668 to download

Reply
Hugo April 5, 2021 - 9:10 pm

Where can I find the codeplug, firmware and programming software for RT80?
Is there any software to use on mac?

Reply
Cherry
Cherry April 8, 2021 - 10:02 am

sorry, our software only can be used for the computer with window system
RT80 software can be download here:https://www.retevis.com/RT80-UHF-Full-power-Business-DMR-Radio#A9134A-C9018A
Choose support-software/firmware to download

Reply
Juan Guzman April 9, 2021 - 12:47 am

Hola necesito programar walkie talkie RT648 me pueden mandar el software en version en ingles Gracias

Reply
Nick April 13, 2021 - 12:10 am

I have quite a few RT5 radios that I need to program and I went to the download and downloaded it but the files are showing there corrupt. I do have a windows system. Please help!!

Reply
Patrick April 21, 2021 - 8:17 pm

I tried downloading the software of the RT98U but every time I use it to program (i.e. ‘Write to radio’) channels, it always says ‘Model type is wrong. Overwrite? PC is AT-779U, Radio is RT98U’. Apparently AT-779U is another model, is there another software program that is actually for the RT98U for me to use? The second version also doesn’t work since there’s a file missing. Please help.

Reply
Cherry
Cherry April 22, 2021 - 3:14 pm

hi, may I know your radio version?
and please download the software from our website.

Reply
Scott May 9, 2021 - 1:27 am

I just downloaded and installed the RB17A software, but the app menus are all question marks or chinese characters instead of english text, and there is no way to read the interface to change that. Any help?

Reply
Scott C July 10, 2021 - 11:11 am

Click on the menu drrop down that has a (s) then select (L) then select the top ??? on the drop down then hit select O it should change to english, took me a while to firgure this out

Reply
Luis Mena May 11, 2021 - 11:12 pm

Hello,

I downloaded and installed the RT22 software version 1.05. I’m having issues reading from and connecting to my RT22. The exact message is “Cannot connect the radio.” Below are a few things that I have tried.
• Restarting my computer
• Tried different RT22 radios
• Tried different USB ports on my computer
• Tried with 2 more computers and the same error, it does not save the change of COMM Port to my selection so it always will give error of can’t connect
• Confirmed that I’m using the correct COM port via Device Manager
• I can connect to my radios using (old) version 1.00 of the RT22 software (I have it on a friends computer but not de installer so I can install on mine)

Please advise on further steps. Otherwise, where can I download version 1.00 of the software?

Reply
Jackson Barrett May 19, 2021 - 7:56 pm

I can’t seem to use the RT22 programming tool, it won’t seem to connect to the radio. I’ve updated any driver needed to work and no results, I’ve even tried two different programming cables. I did notice that the company I work for had an older version of the software and it had worked, but I can no longer seem to find it. Is it possible to get an older version of the programming software?

Reply
Ronaldo Moreira June 15, 2021 - 6:36 am

I purchased 2 RT84 radios (S/N 2009R0841110368 and S/N 2009R0841110354) and downloaded the applications “RT84_Firmware_V02.03” and “DownLoad v03;04_En”. However, when updating the firmware the screen of radios are unreadable and now ask for the password to start. You can send me the files to restore the factory setup and solve the password problem to boot or indicate a technician in Brazil to solve the problem. Grateful Ronaldo Moreira

Reply
glen July 16, 2021 - 7:20 am

i have the rb618 and downloaded the software (followed your example, thanks) but when i plug the usb into my computer with radio attached, nothing happens, even with radio on as it say to do, Ive tried 3 different ubs cables and ports.

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy