Home User Tutorial The latest Firmware Update of Retevis RT3 & RT8

The latest Firmware Update of Retevis RT3 & RT8

by retevis
806 views

02/24/2017 — The latest Firmware Information is Updated now . we add one RT3 without GPS new vocoder file .  And Please download the file on Facebook Offers ( For Free of course ) . You could Like and follow our Facebook Page to Get more Retevis services and special offers . Now let’s see how to download and update the latest Firmware below —

retevis firmware

 

 

Firmware Update Contents

1.Add side key to transmit 1750.
2.Fix machine crashes of some new radio LCD screens more stably .

Firmware Update preparations

1.Know your vocoder versions . And that’s why your radio kept repetitive starting when you choose the unmatched version .See how to check about it below :

Open your radio ,Click “Utilities”–”Radio Infor”–”Versions”. Then it will show the vocoder version Infor of this radio . And just take a RT3 as an example  :

Firmware Upgrade of RT3 & RT8.

2. After you download the Firmware on Facebook , please read the note before updating firstly , It will help you choose the suited vocoder versions .

retevis firmware

 

Operation Steps

Still take this RT3 as an example ,see attached pictures below:
1.Open the Firmware file ,click the red part “Upgrade”.

 

Firmware Upgrade of RT3 & RT8

2.Then it will show a box

 

Firmware Update of RT3 & RT8 (2)

 

3.Connect your radio to the computer via programming cable . And hold PTT and the key which is upon the PTT together ,meanwhile open the radio power , the light near the knob will light up with green and red , then you can leave your hands off to start next step.

 

4.Find the only one “bin” file ,put it somewhere you could easily check about .Cause next we will click “Open Update File” to make the “bin” file into that green part .Then choose the “Download Update File” .

 

Firmware Upgrade of RT3 & RT8 (1)

5.Finished the process with showing a success prompt by computer . Restart the radio is ok.
And by the way ,the problems you got when Updating such as system halted or kept rebooting ,all because they were installed with unmatched firmware version. So just re-download the suited one to update again it’ll be fine.

 

You may also like

Leave a Comment

*

385 comments

SV1EML July 11, 2016 - 4:18 am

Hi

My RT-3 have Firmware version :D002.034 CP VER:V01.30
What type of Firmware i need to update?

Reply
July 11, 2016 - 8:55 am

It sure be an old Vocoder dear.Send you the Firmware now ,pls have a check about your Email.

Reply
Stephan July 27, 2016 - 6:40 pm

HI. I`m looking for the FW-File fo rmy RT8
It has FW S013.009 and CP V01.34.

Thank You.

Reply
Stephan July 28, 2016 - 7:12 pm

Evrerything worked fine. Thank You very much.

Reply
July 29, 2016 - 8:14 am

Great ,congratulations to you .

July 11, 2016 - 9:42 am

And about the Firmware you received ,remember unzip the file firstly and then choose’Firmware for RT3 old vocoder’ which is suited for your radio.

Reply
Daniele July 11, 2016 - 10:15 pm

Hi dear

using the 3.008 firmware update I see the contacts names truncated .
could you please send me an update to solve this kind of issues ?
regards

Reply
July 12, 2016 - 9:01 am

Pls check on your Email dear,the firmware is already waiting for you .And if there is any other problems , remember i’m here to help.

Reply
Paul Taylor July 12, 2016 - 2:01 am

Ni hao, dear Zoe… my RT3 says “D013.009”. Please can I have the new firmware? x

Reply
July 12, 2016 - 8:29 am

Ni hao ,dear Paul~ Sure you could get it ,just have a check about ur mail,and don’t forget unzip the file firstly.Any other problems when you get after that pls tell me to help.

Reply
Alexander Hahn
Alexander Hahn July 12, 2016 - 7:02 am

How do I get the newest firmware for my RT8 GPS?
There is no download link.

Reply
July 12, 2016 - 8:03 am

Pls check about ur Email,Unzip the file firstly then choose the suited one.Any problems happened pls tell me to help .

Reply
Steffen Fog July 23, 2017 - 4:50 am

Hi Zoe…
I also need an update for my RT8 firmware.
Currently using S013.020 CP V0136

Where do I find the latest version (incl. GPS)?

Br Steffen Fog

Reply
Ailunce
Ailunce July 25, 2017 - 8:32 am

hello, have send to your email, please check your email.
thanks

Reply
Giorgio July 12, 2016 - 10:41 pm

What is the latest firmware for RT3?

And what is your official position about the patched firmwares that add some very interesting function like for example all the DMR ID database contact list?

Thanks, please send me if possible latest firmware.

Reply
July 13, 2016 - 10:24 am

Thx for your opinions,we will feedback to our factory to study about it and you will receive the RT3 Firmware by mail.

Reply
Bert B.
Bert B. July 13, 2016 - 12:49 am

Hie Zoe!
Is there also a new FW release for old vocoder / non-GPS RT3 radios?

Reply
July 13, 2016 - 9:50 am

Yep,Sending to ur mail now.

Reply
Bert B. July 14, 2016 - 3:14 am

Hi Zoe,
received and flashed successfully, thanks a lot!
Final question: is the 1750Hz tone by side key also available for D003.020 (RT3 old voc / no GPS9? How to set up this by the CPS?

BR… Bert

Reply
July 15, 2016 - 11:56 am

Set it through the software ,and I already send you one ,but just download on our website is ok.

Reply
DK 8260
DK 8260 July 13, 2016 - 4:26 am

I have a RT-3 with firmware version: D’002,034 CP VER: V01.30, how about a firmware update for this.

Reply
July 13, 2016 - 8:39 am

Ok ,Sending u the old Vocoder for your RT3 now .

Reply
Uli Knobloch
Uli Knobloch July 13, 2016 - 6:51 am

Hello dear Zhoe
How do I get the newest firmware for my RT8 GPS?
Best regards

Uli.

Reply
July 13, 2016 - 8:33 am

Ok ,don’t worry.Check ur mail you will get it.

Reply
Harry Laaksonen July 13, 2016 - 12:02 pm

Hi
I need firmware for RT8 with GPS.
Thanks Laxon

Reply
July 15, 2016 - 11:36 am

No problems dear ,Pls have a check on you mail.It should be there already:)

Reply
Dan July 13, 2016 - 1:45 pm

im sorry but im new here..how do we go about getting both upgrades for our radio’s.i see i fall into the group with the older software and software..thanks

Reply
July 15, 2016 - 11:37 am

Well ,you have to check about the radio infor firstly ,If it is like S00X.XXX ,it sure be an old Vocoder .If it is like S01X.XXX ,it sure be a new Vocoder .

Reply
Uli Knobloch
Uli Knobloch July 13, 2016 - 4:46 pm

Dear Zhoe
Thanks for the fast email and the new firmware.
Best regards and a nice Day

Uli

Reply
July 13, 2016 - 6:19 pm

Such a gentleman you are 🙂 .Glad u made it and if there is anything else wrong ,pls let me know it.
And By the way ,I’m Zoe not Zheo,LOL ~

Reply
Chris F5UII
Chris F5UII July 13, 2016 - 7:12 pm

Dear Zoe,

I just received my RT3.
I download and installed the CPS 1.30 and USB driver on Windows7, but when connecting to the PC, there is no way to read or write CPS paramters to the RT3.
In the periphericals, i see well “STM Device in DFU Mode” under USB controlers (2 files are in details : “C:\Windows\system32\DRIVERS\klfltdev.sys (from Kaspersky Lab ZAO) and C:\Windows\system32\drivers\STTub30.sys (from STMicroelectronics version 3.0B)

The RT3 Firmware is D013.009, CPS 1.30. Is my problem linked to the Program Radio password ? Is there a default password to be entering here ?

Thank you in advanced for your answers
Chris

Reply
Chris F5UII
Chris F5UII July 13, 2016 - 7:34 pm

I understood self my mistake… was waiting on the read/write page without action on OK bouton…
My you please send me the new firmware also.

Regards

Reply
July 15, 2016 - 11:43 am

No problems dear.

Reply
July 15, 2016 - 11:45 am

Please have a second try when you receive the firmware and software i sent ,then it wouldn’t be a problem for you i trust.

Reply
Remi F6CNB July 14, 2016 - 5:01 am

Hi Zoe,

Could I get the latest firmware for my RT3
Firmware version :D002.034 CP VER:V01.30

Thanks and 73 Remi W5/F6CNB

Reply
July 15, 2016 - 11:49 am

No problems dear , Check your mail you will get it there.

Reply
paul July 15, 2016 - 8:17 pm

Hi i need the firmware update to retevis rt8 with gps and a rt3, please tell me a link to take it.

thanks

Reply
July 16, 2016 - 9:18 am

Pls have a check about ur mail dear,it should be there now.

Reply
Angelo July 17, 2016 - 7:06 am

Hi,
Could you send me lastest firmware for rt3, old vocoder?
Thx

Reply
July 18, 2016 - 8:05 am

Received dear ?

Reply
IZ1PNY July 18, 2016 - 1:16 pm

Good morning.
I have one RT3, firmware 3008.
The problem is autosetting volume alwais, very noise tihs problem.
Solution ?
Thank.

Reply
July 20, 2016 - 11:07 am

Maybe there was any other signal interference ,and you could try to change the channels or set CTCSS/DCS .

Reply
George July 18, 2016 - 8:25 pm

Hi. I have firmware D003.034 on my RT3. Can you please send me the appropriate file for upgrade? Thanks

Reply
July 19, 2016 - 9:22 am

OK dear,pls have a check on your mail.

Reply
George July 20, 2016 - 3:57 pm

Received and updated, thank you so much 🙂

Reply
July 21, 2016 - 9:47 am

My pleasure 🙂

Reply
Rinna Plaua
Rinna Plaua July 18, 2016 - 8:52 pm

Hi Zoe, I would like to ask you to forward the newest FW for my RT3.
current Firmware version is D002.034 CP VER:V01.30
Thanks!

Reply
July 19, 2016 - 9:16 am

No problems dear , I already sent u the proper one by mail.

Reply
Rinna Plaua
Rinna Plaua July 19, 2016 - 5:06 pm

Dear Zoe,
thank you for sending the new Firmware for my RT3.
before updating it was D002.034, CP vers. V01.30,
afte updating it is D003.008, CP vers. V01.32.
Afte the update-process I started the RT3 Radio Program Software (my current Version is 1.30.0) but in the Menu ‘Buttons Definition’ I can’t see the Option 1750Hz so I tried the Radio Program Software for the RT8 and activated the 1750Hz-option for the upper side button. After writing back the new configuration to my RT3 still does not work. Could it be, that the 1750 Hz-feature is working only on the RT8?

Reply
July 20, 2016 - 8:37 am

Pay attention that our software is also updated ,Maybe try again dear ,here is the download link — http://www.retevis.com/programming_software

Reply
Andrea July 19, 2016 - 7:38 pm

Hi Zoe,
could you send me the latest firmware version for my new Rt3 (002.034 CP VER:V01.30)?

Thanks!
Andrea

Reply
July 20, 2016 - 8:42 am

No problems dear ,you know you could find it on mail.

Reply
Rinna Plaua
Rinna Plaua July 20, 2016 - 7:31 pm

Dear Zoe, thanks for your very quick and good support so far! In the meantime I bought a RT8 too. The current FW is S013.009, the CP is V 01.34. Can you send me the latest firmware please ? Thanks a lot !
Rinna

Reply
July 21, 2016 - 9:25 am

Ok. no problems dear.Chcek it on mail pls.

Reply
BARRY WILLIAMS July 21, 2016 - 10:28 pm

Hi Zoe
I have just purchased a Retevis RT-RT8, The firmware version is D013.009 and the CP version is 01.30. Is this the latest Firmware or is there a updated one please ?

Reply
July 22, 2016 - 8:59 am

Sent you already and remember choose ‘Firmware for RT8 new vocoder’ file.

Reply
peter seitz July 22, 2016 - 8:10 pm

Hi i also have just purchased an RT8.

My firmware is D013.009 and cp is v01.30.

Peter

Reply
July 23, 2016 - 9:04 am

Ok ,pls check your mail now ~

Reply
Fabio Pastori July 23, 2016 - 1:03 am

I got a new RT8 with firmware S013.009 CP VER V01.34, I must update the firmware? where I can found the programming software?

Reply
July 23, 2016 - 9:03 am

Software Link – http://www.retevis.com/programming_software .And Firmware is already on your mail now .

Reply
Thom July 23, 2016 - 6:02 pm

Hello. I uae a new Retevis RT 8 with Fi.rmware D 002.034 and CP Version V 01.36. Can i have the new firmware please?

Reply
July 25, 2016 - 5:34 pm

Pls have a check about ur mail dear and choose the old version .

Reply
Helmut July 23, 2016 - 9:47 pm

Hi

My RT-3 has Firmware version :D002.034 CP VER:V01.30
What type of Firmware do i need to update?

Thanks

Reply
July 25, 2016 - 5:33 pm

Pls have a check about ur mail dear and choose the old version.

Reply
Eduardo De Carvalho
Eduardo De Carvalho July 24, 2016 - 11:46 am

Hello, Where can I get the latest RT8 firmware?

Reply
July 25, 2016 - 5:32 pm

Pls have a check about ur mail dear .

Reply
Andrew July 24, 2016 - 7:09 pm

Dear Zoe,
could you please send me the new Firmware for my RT3?
Actual Version ist D002.034, CP vers. V01.30,

Reply
July 25, 2016 - 5:30 pm

Pls have a check about ur mail dear .

Reply
Andrew July 29, 2016 - 11:35 pm

Hi,
is this for the 430 MHz as well as for the 136 MHz RT3 ?

Thanks
Andrew

Reply
July 30, 2016 - 10:34 am

You mean is the firmware suited RT3 with 430 MHz or RT3 with 136 MHz ? If so ,the answer is yes .

Reply
Thom July 25, 2016 - 11:49 pm

Thank you for sending the new firmware.
I forgot to write i have RT 8 without GPS. Can i use the firmware without GPS-Funktion too?

Reply
July 26, 2016 - 10:42 am

They are same firmware dear ,just choose the old version is alright .

Reply
Felipe July 26, 2016 - 10:49 pm

Hi zoe, can you send the last firmware for RT8 pls, the firmware version is D013.009 and the CP version is 01.30

Reply
July 27, 2016 - 8:41 am

No Problems.It’s on your mail now and pls choose the new version.

Reply
felipe July 27, 2016 - 10:51 am

thank you!

Reply
Roberto July 27, 2016 - 11:09 pm

Hi zoe,
Please can you send me the last firmware for RT8-GPS. My actual firmware is:
Firmware ver. S013.009
CP ver. V01.36

Thank you

Reply
July 28, 2016 - 4:44 pm

Now the situation is that if the firmware is not well-operated ,the radio will die totally and completely.Then the radio should be back to China Factory to be fixed for free. But we won’t pay for the shipping cost. So if the radio has been used well , we don’t suggest people who are not very technical to update it .Anyway i will still send the firmware to you .Just so you know the risk.

Reply
Richard July 28, 2016 - 3:25 am

Hello Zoe,
in recent RT3 programming software there ist 1750 HZ function to add to side buttons but independent which button i choose now real function after upload to my device.
If this is firmware related please send recent firmware to ma e-mail adress below.
System information of my device:
Firmware: D002.034
CP Ver: V01.32
Thanks for your patience with the ham radio freaks

Reply
July 28, 2016 - 4:43 pm

Now the situation is that if the firmware is not well-operated ,the radio will die totally and completely.Then the radio should be back to China Factory to be fixed for free. But we won’t pay for the shipping cost. So if the radio has been used well , we don’t suggest people who are not very technical to update it .Anyway i will still send the firmware to you .Just so you know the risk.

Reply
July 28, 2016 - 4:44 pm

Now the situation is that if the firmware is not well-operated ,the radio will die totally and completely.Then the radio should be back to China Factory to be fixed for free. But we won’t pay for the shipping cost. So if the radio has been used well , we don’t suggest people who are not very technical to update it .Anyway i will still send the firmware to you .Just so you know the risk.

Reply
Richard July 29, 2016 - 10:16 pm

Hey Zoe,
first of all – thanks for the fast and professional replay by sending full rt3 & rt8 firmware packages within 12h – phantastic service – the big Japanes and German competitors could learn a lot from you and your company.
Also your patience with the, sometimes stupid hamradio geeks is really nice.

Pleae allow one more question:
Firmware update proceeded with out any error message.
Firmware info changed from D002.034 to D003.008.
Independent the topic with non working 1750 Hz tone is still open.
With the programming software it is possible to assign the 1750 Hz. function to the side buttons, but independent how to use – before – while – after pushing PTT button no tone appear in a second device on any mode ( digital / analog ).

Actually i believing on two possibilities :
a.) the problem sits in fron of the device and it`s not able to find the right using advices in internet and manual.

b.) the hardware of rt3 is not able to generate a 1750 Hz tone and software feature is only for rt8 type,

It would be phantastic to get your confirmation of a or b or better you know a solution c and would like to advise me and probably some other rt3 users how to do !

Greetings from Germany to China.
Richard

Reply
August 3, 2016 - 10:30 am

1750Hz is for connecting Repeater,what’s your second device ?

Reply
Rinna Plaua
Rinna Plaua August 1, 2016 - 11:39 pm

Hi Zoe, the 1750 Hz works fine with the RT-8 (new Vocoder) after updating the Firmware. But with my RT-3 I made the same experience as Richard. Therefore I am dealing with the same question. Just a guess: could it be that for the RT-3 the 1750Hz tone only works in the RT-3 version with new vocoder?
Rinna

Reply
August 3, 2016 - 10:32 am

After updating the Firmware ,they both have 1750HZ function .

Reply
Richard August 7, 2016 - 8:12 pm

Hello Zoe,
thanks for feedback.
Generally it “has” 1750 Hz. Function but it doesn’t work.
( Setting to 1st. Side button is done but no reaction by pressing )
Probably it’s a “user mistake” – please send a link to a workaround or manual how to use the 1750 Hz. Funktion.
Thanks a lot in advance.

Reply
August 9, 2016 - 4:00 pm

I already feedback to our technicists ,they will make a video or manual soon.

Reply
Jon Easton August 3, 2016 - 2:52 am

Hi Zoe, Can I please have a copy of the original D013.009 Firmware for my RT3 please? As I tried to upgrade but it went wrong.I now get the the constant reboot problem.
Many thanks for your help

Jon

Reply
August 3, 2016 - 10:04 am

Pls note the risk .The firmware is already on your mail .And find your seller to help the operation will be better .

Reply
Bob August 5, 2016 - 1:30 am

Can I please have the RT3 firmware to upgrade from D.002.034 and CP V01.32
Thanks. I understand the risks. I have done a lot of radio / phone upgrading in the past.

Bob

Reply
August 5, 2016 - 10:56 am

Ok . Check it on your mail pls .

Reply
Bob August 5, 2016 - 8:17 pm

Thanks! Got it in email.

Reply
Michael August 8, 2016 - 7:44 pm

Hello,
I have purchased a RT8.
My firmware is D013.009 and cp is v01.36. I don’t know if I have the option GPS included.
Is it the lastest firmware ?
thank you
Michaël ON7KGK

Reply
August 9, 2016 - 4:24 pm

Hhhhhhhh ~ Hello Michael,glad to see you again and thx for choosing Retevis finally ! Well The one who talked to you on Twitter was me . But where you bought the RT8 ? How could you don’t know wheather it is GPS version or not ? Well ,back to the topic of Firmware ,it’s already on your mailbox ,pls have a check about it .

Reply
Michael August 10, 2016 - 3:23 pm

Hi Zoe !
Yes I recognize you now.
Thank your for the files.
I have bought my RT8 on Germany on ebay here : http://www.befr.ebay.be/itm/322210174511
There is no mention of a GPS in his description but in fact this is not important for my usage.
Have a nice day.
Michaël from Belgium

Reply
Patrick August 9, 2016 - 2:16 am

Hello Zoe Chen

I think i dit what wrong with my retevis 3tr.
he give only welcome in the screen, a beep and welcome.
Can i repair this with the original firmware?
Can you send it to my please.

Thank you

Patrick

Reply
August 9, 2016 - 5:03 pm

Pls have a check about your mailbox.

Reply
Heino Held August 9, 2016 - 5:14 am

Hello Zoe Chen,
please be so kind to send me the new firmware. My Retevis RT3: S/N: 201603RT30888
Firmware: D003.008, CP Vers.: V1.30.
Best regards,
Heino

Reply
August 9, 2016 - 4:40 pm

No problems dear,pls have a check about your mailbox. And choose the old version.

Reply
Alberto Cor
Alberto Cor August 9, 2016 - 8:48 pm

Dear Zoe
I just received my brand new RT3, I checked the FW version D013.009 and CP Vers. V01.32,
Can you send me the updated FW and CP?

Thank you
Alberto

Reply
August 10, 2016 - 10:19 am

Ok , And remember to choose the new version pls .

Reply
Patrick August 10, 2016 - 12:30 am

Thanks Zoe Chen!

It works again!

bye bye

Reply
August 10, 2016 - 8:23 am

Happy for you ,bye~

Reply
Uli August 11, 2016 - 3:27 pm

Hi Zoe
I have just purchased a Retevis RT8-GPS, The firmware version is D013.020 and the CP version is 01.36. Is this the latest Firmware or is there a updated one please ?
Best regards

Uli (DO9ULI)

Reply
August 12, 2016 - 8:17 am

Have a check about your mailbox pls

Reply
Uli August 11, 2016 - 3:37 pm

Hi Zoe
I have just purchased a Retevis RT3, The firmware version is D02.030 and the CP version is 01.30. Is this the latest Firmware or is there a updated one please ?
Best regards

Uli (DO9ULI)

Reply
August 12, 2016 - 8:14 am

D02.030 or D002.030 ? The firmware is already on your mailbox.

Reply
Darren August 12, 2016 - 6:49 pm

Hi Zoe,
I have purchased a rt3 CP ver 01.32 firmware do13.020 Vhf radio is this the latest firmware for this radio.
Best regards,
Darren.

Reply
August 15, 2016 - 7:59 am

On ur mailbox now:)

Reply
Marco Sovilla
Marco Sovilla August 13, 2016 - 4:22 pm

Hi Zoe,

I just received my RT8 from ebay (with GPS).
fw version is S013.009 and CP V01.36.

I cannot operate GPS, i also didn’t understand difference from GPS1 to GPS15, which should I select?

And should I update fw?

thanks in advance, marco

Reply
August 16, 2016 - 5:45 pm

Here is a blog about RT8 GPS function and it is no big difference from GPS1 to GPS15,just represent different satellite. http://blog.retevis.com/set-retevis-rt8-gps-function/

Reply
Marco Sovilla
Marco Sovilla August 14, 2016 - 9:59 pm

Hi,

I wish to use another signalling tone in analog channel. Instead of DTMF I whish to use CCIRR.
It is a very similar signalling system, but only one frequency is assigned to each digit, instead of two like in DTMF.
It is possible to update fw in such a way I can freely assign a frequency to each digit instead of using DTMF fixed frequencies?

thanks in advance, Marco
PS:please contact me in my email, I glad to have a direct contact with sw developer in order to explain me better

Reply
August 30, 2016 - 10:26 am

Sorry but we couldn’t achieve this idea for now.

Reply
tom August 16, 2016 - 1:45 pm

Hello. I have a Retells RT-8 without GPS and the Firmware is D002.034 and CP Version is V01.36.
Have you new Firmware and what is the new or better in the new firmware?
Thank you

Reply
August 16, 2016 - 5:50 pm

Hello,the firmware is for fixing machine crashes of some new radio LCD screens and add side key to transmit 1750.If your radio works well ,we don’t advice to update.

Reply
Thom August 16, 2016 - 1:50 pm

I have a RT 8 without GPS. Firmware is D002.034 and CP V01.36.
Have you new Firmware and what is new?

Reply
marco August 19, 2016 - 10:09 pm

Hi,

it is possible to use a different signalling system than DTMF.
My organisation is using CCIR or ZVEI.

Also they do add FFSK signalling to the analog communication to send GPS data.

Is this possible?

Kindly regards,

Reply
August 23, 2016 - 2:57 pm

Sorry but there can only use DTMF.And it is not possible to send GPS data under the analog model.

Reply
Art VK4GO August 22, 2016 - 1:57 pm

Hello Zoe
I got a RT-3 with Firmware 002.034 & CP V01.30
Do I need a update ?

Regards Art VK4GO

Reply
August 23, 2016 - 10:39 am

If your radio works well ,then i don’t think you have to update ,because this firmware is mainly for fixing blank screen .

Reply
Darren August 23, 2016 - 3:45 pm

Hi Zoe ,
got the update .Thanks for the help.
73s Darren

Reply
Ennio Vernengo
Ennio Vernengo August 24, 2016 - 5:13 am

Hello Zoe,
i’ve got RT3 with Firmware 002.034 & CP V01.32.
Do i need update ?

Thank you.

Ennio

Reply
August 26, 2016 - 9:32 am

If your radio works well ,then i don’t think you have to update ,because this firmware is mainly for fixing blank screen .

Reply
Dave Oliver
Dave Oliver August 26, 2016 - 6:56 pm

Hi Zoe

Can you email me the link/file for the RT3 Firmware Update.
My existing version is D002.034 CP VER:V01.30

Reply
August 27, 2016 - 1:56 pm

ok

Reply
Chris August 30, 2016 - 1:52 am

Hi,

my RT3 has the following versions.
Firmware: D002.034
CP: V01.30

Please could I get the accurate firmware for this radio?

Many thanks in advance.

Chris

Reply
August 30, 2016 - 9:14 am

Ok

Reply
Bernd Rechlin
Bernd Rechlin August 31, 2016 - 1:24 am

Hi Zoe,
I have purchased a RT3 CP Ver 01.30 and firmware D002.034. Is this the latest firmware for this radio.
Best regards,
Berny

Reply
September 1, 2016 - 8:26 am

Yes,mainly for fixing blank screen and add 1750HZ function.

Reply
Colin August 31, 2016 - 10:02 am

Hi Zoe,

Could I get the latest firmware for my RT3
Firmware version :D002.034 CP VER:V01.32

Thanks 73 Colin VK2GP

Reply
September 1, 2016 - 8:26 am

Ok.

Reply
Florian September 1, 2016 - 3:33 pm

Hello Zoe,

Could I get the latest firmware for my RT3
Firmware version :D002.034 CP VER:V01.30

Thanks Florian DG5HFS

Reply
September 1, 2016 - 3:45 pm

Ok

Reply
stefan September 1, 2016 - 6:40 pm

Hello!

My Radio has Firmware Ver.: D002.034, CP Ver.: V01.30.

Which firmware do i need? Can you send me this?

Thanks
Stefan

Reply
September 5, 2016 - 6:29 pm

Ok .yours suit for the old version .

Reply
Stefan September 7, 2016 - 8:17 pm

Many thanks!

Reply
Florian September 1, 2016 - 7:02 pm

Hello Zoe
On my RT3 with the old Vocoder the 1750Hz won’t work.The 1750Hz can programmed to side key 1 or 2 but in don’t transmit ton tone by pushing the side button.

73 Florian DG5HFS

Reply
Chris Rolinson September 4, 2016 - 1:50 am

Hello Zoe

Thank you for all your assistance.

My RT3 has firmware DO13.009 and CP Ver 01.32.

Is there a newer firmware please?

Chris

Reply
September 5, 2016 - 6:33 pm

What i sent to you is the latest firmware and yours suit for the new version. Pls choose the new file one .

Reply
Karl September 4, 2016 - 4:29 am

Hi I have both the VHF and UHF RT8 radios both with D002.034 CP1.30 Firmware Can I have the latest firmware please.

Reply
September 5, 2016 - 6:36 pm

OK ,Karl !

Reply
Clemens September 11, 2016 - 10:37 am

Habe die Firmware D002.034, CP Ver .: V01.30. Kann ich die aktuelle bekomme. ???

Reply
September 13, 2016 - 2:14 pm

RT 3 / RT8? Alle an Sie gesendet werden und die alte Vocoder wählen.

Reply
Klaus Klepper September 12, 2016 - 9:13 pm

Hi Zoe,
I would like to ask you to forward the newest FW for my RT3.
current Firmware version is D002.034 CP VER:V01.30

Thanks

Klaus DG4FBC

Reply
September 13, 2016 - 2:15 pm

Ok,choose the old vocoder.

Reply
September 13, 2016 - 2:18 pm

Thx for your reading.

Reply
Klaus Klepper September 13, 2016 - 5:23 pm

Vielen Dank für den Service 🙂 !

Klaus
DG4FBC

Reply
Toni September 18, 2016 - 12:49 am

Hi.

I have RT3 with Firmware version: D013.014 CP Ver: V01.30

Can you send me latest firmware
Thank you

Reply
September 18, 2016 - 4:45 pm

Please choose the NEW VOCODER on the file I sent .

Reply
Toni September 19, 2016 - 1:05 am

I have a Blank screen problem (radio shows only white screen) but it transmits, changes channels, and receives fine, it seems just display is not working correctly.

I have tried to upgrade firmware with Retevis-Vocoder-RT3-D13.14.bin that you sent me, but when upgrading it shows dialog in chinese at the end. I don’t know if firmware was updated, because screen still doesn’t work, it’s white. Should I return the radio or is it firmware problem, because in description Operation.pdf it says: “2. Solve the problem of blank display “

Reply
September 19, 2016 - 11:34 am

That’s a little weird.The firmware does for fixing white screen and the file I sent to you has been tested for about hundred times by different people.Could you take a photo to me at info@retevis.com ?

Reply
Toni September 23, 2016 - 4:34 am

I received new replacement radio. This one works perfectly. The firmware on this one is: D013.020 CP Ver.: V01.32. Is this the latest firmware?

The video is still uploaded try this link:
https://www.dropbox.com/s/co6rusvgy6bdkf2/WP_20160917_21_32_21_Pro.mp4?dl=0

September 27, 2016 - 3:11 pm

Yes,and it is for fixing white screen radios and add a 1750Hz function .

Volker September 18, 2016 - 4:55 am

Hej!
I got a brandnew RT3.AT first glance it makes a good impression
It has Firmware Ver.: D013.009, and
CP VER.: V01.32
Is this the current version?
My problem is that I never hear a sound when listening into a channel. The squelch cannot be turned off!
Do you know a reason for my misfortune?
Thanks for quick answer!

Volker, DL9VH

Reply
September 19, 2016 - 10:11 am

What model radio that you communicated with ?

Reply
Fernando Carapeto
Fernando Carapeto September 19, 2016 - 1:09 am

Olá

I have RT3 with Firmware version: D002.034 CP Ver: V01.32

Can you send me latest firmware

Thank you

Reply
September 19, 2016 - 9:51 am

Ok

Reply
Alex September 20, 2016 - 5:40 pm

Hi Zoe,

Is it possible for you to also send me the new firmware for the RT3?
Thanks in advance

Alex

Reply
September 21, 2016 - 1:44 pm

Very Possible dear 🙂

Reply
Stephen McCormick September 22, 2016 - 6:50 am

Hi Zoe

May i have the new firmware please my RT3 has Firmware version D002.034 CP Vers V01.32

Many Thanks

Stephen

Reply
September 22, 2016 - 8:41 am

Ok, no problems .

Reply
Peter September 22, 2016 - 10:32 am

I’ve just brought a new rt3 it’s has firmware D013. 009 and CP V01. 30 can you please send me the latest official update please

Reply
September 22, 2016 - 6:11 pm

Ok ,please choose the new vocoder.

Reply
Antony Worth September 23, 2016 - 6:49 pm

Hello Zoe,

I have a RETEVIS RT8 with GPS, versions:
Firmware: S013.009
CP Ver: V01.36

Please Zoe, can you send me the lastest update?
Thank you.
Antony

Reply
September 27, 2016 - 3:12 pm

ok

Reply
Jo September 24, 2016 - 5:55 pm

Hello Mrs. Chen,
I’ve got the RT3 with the firmware D013.009, CP Ver. V01.30.
Can you send me the latest firmware and software updates?
Thanks in advance.
Best regards
Jo

Reply
September 27, 2016 - 3:22 pm

Firmware :please choose the new vocoder in file i sent.
Software :http://www.retevis.com/index.php/programming_software

Reply
Josh Penney September 25, 2016 - 12:50 am

Hi Zoe,
I have a new RT-3 with Firmware ver: D013.020, and CP ver: V01.32. I have noticed while scanning analog channels, the radio behaves like I have priority scan set (transmissions are interrupted for about 0.5 seconds every 2 seconds). I have not set priority scan at all. I have also noticed while receiving a transmission, occasionally the screen will change to an all-white screen with a random character in the top-left corner. This only lasts for about a second. I would like to try the latest firmware to see if this fixes these issues. I am aware of the risks. Thank you in advance, and have a great day!

Reply
Josh Penney September 26, 2016 - 12:26 pm

Just a followup…
I discovered the “priority scan” was a programming error on my part (apparently I had to specify ‘none’ in the priority channel). However, the random white-display with the random character in the top left corner still persists. Again, I would like to see if the most recent firmware fixes this. Please send me the file for the most recent firmware for the “new vocoder”. Thank you in advance!

Reply
September 30, 2016 - 3:53 pm

Sent to you ,and it would be better if you could send me a picture of the problem .Anyway ,please let me know the result of it . Mail address:info@retevis.com

Reply
gm1ply September 26, 2016 - 4:08 pm

i have just got a new rt8 , can you please advise what the latest firmware version is ,
my radio shows s013.009 v01.34
the radio is locking up sometimes requiring the radio to be switched off and on
thanks rickie

Reply
September 27, 2016 - 2:57 pm

Ok ,please choose the new vocoder in that file i sent.

Reply
Dr. Alexander H. Hahn September 27, 2016 - 6:07 am

ni hao Zoe,

is there a newer firmware for my RT8GPS? My current one is S013.014 CP Ver. V01.36.
.
xie xie nin, Alex

Reply
September 27, 2016 - 2:54 pm

Hello Alex,ok please choose the new vocoder in that file.

Reply
Jari Lammi
Jari Lammi September 27, 2016 - 6:33 pm

I’ve purchased a new Retevis RT3 from eBay, just got it yesterday. The Firmware seems to be D003.020 VER: CP V01.30. Should I upgrade it to a newer one? Is it possible to update the vocoder or is it fixed somehow? Previously I’ve used competing DMR brands and radios, this is the first Retevis for me. The build quality seems nice so far. 🙂

Reply
September 30, 2016 - 2:05 pm

I think the blog clearly said that the firmware is for fixing the white screen and add 1750Hz function .I’ll send you the firmware and it is you who decides use or not .

Reply
Jo Seitz September 28, 2016 - 8:47 pm

Hello Mrs. Chen,
thank you for the RT3-update – the new firmware works good.
Today I’ve got the RT8 with GPS and the firmware S013.020, CP Ver. V01.36.
Can you also send me the latest firmware and software updates for
this Radio?
Thanks in advance.
Best regards
Jo, DH1SJ

Reply
September 30, 2016 - 1:59 pm

Sent you all now .

Reply
peter October 1, 2016 - 1:54 am

I HAVE THE RETEVIS RT3 WITH
FIRMWARE D013.O14
CP VER V01.30
is this the latested update or is there an update you can send me please

Reply
Konrad
Konrad October 1, 2016 - 2:57 am

Hello dear Zhoe
How do I get the newest firmware for my RT8 GPS?
Best regards
Konrad

Reply
October 9, 2016 - 8:53 am

I sent it to your mailbox already .

Reply
Richard Drinkwater October 6, 2016 - 4:51 pm

Hi Zoe, I have an RT3 with firmware D002.034 and CP ver V01.32. Would you please send me any updates for this radio.

Richard.

Reply
October 9, 2016 - 8:52 am

Ok.no problems.Find it on your mailbox please.

Reply
Neovo Graham
Neovo Graham October 12, 2016 - 11:04 pm

firmware please thank you “D’002,034 CP VER: V01.30”

Reply
October 13, 2016 - 8:38 am

Ok

Reply
Andreas Fischer
Andreas Fischer October 13, 2016 - 2:07 am

Hi Zoe, I have an RT8 with firmware D002.034 and CP ver V01.30. Would you please send me any updates for this radio.
thanks in advance and
kind regards
Andreas

Reply
October 13, 2016 - 8:38 am

Ok

Reply
Andreas Fischer
Andreas Fischer October 13, 2016 - 6:02 pm

Hi Zoe,

got it thanks a lot.

best

Reply
Michael Ziehm October 13, 2016 - 9:39 pm

Hi Zoe,
i have an Rt3 with Firmware D002.034 and CP V01.32
1750Hz will not work.
Please send me an Update

73

Michael, DG7MZA

Reply
October 14, 2016 - 8:03 am

no problems.check ur mailbox~

Reply
Michael Ziehm October 17, 2016 - 6:41 pm

Thank you.
The Firmware now is D003.008 but the 170Hz will not work.

Any Idea?

73

Michael

Reply
October 20, 2016 - 5:01 pm

Tell me your operation,I’ll help to check the steps.And Welcome to our Retevis Communication Club on Facebook ,many hams are here .You may get something valuable here. https://www.facebook.com/groups/142003839541558/

Reply
Jan Vdlinden
Jan Vdlinden October 17, 2016 - 11:28 pm

Dear Zoe

Can I get the firmware update for my RT3,
FW D0002.34
CPver. V01.32
Thanks in advance

73 Jan
PA3EPI@amsat.org

Reply
October 18, 2016 - 3:35 pm

On your mailbox now.

Reply
Jens Sielaff October 18, 2016 - 10:20 pm

Hi Zoe,

I have an RT3 with firmware D002.034 and CP ver V01.32. Can I get any updates for this radio too?

Mny thanks
Jens

Reply
October 21, 2016 - 8:52 am

ok

Reply
Jan Vdlinden
Jan Vdlinden October 18, 2016 - 8:26 pm

Dear Zoe

Thank you for the quick response.
I have downloaded the file and found in the
files 2 fw upgrades one to the old vocoder
and one to the new.
My FW is D 002.034 and V 01.32.
I don’t want to brick the tr3 and when I read the
instructions With this both firmwares I cannot
upgrade tot the newest FW. So I read it seams to be that I
must first upgrade to the FW D3.08 and after that
to FW D13.14.

Please tell me or I am right and if so can you send me the
FW D 3.08 wich seems to be needed to start the upgrade
in my case.

Thank you for your attention and support.
73 Jan

Reply
Jan Vdlinden
Jan Vdlinden October 18, 2016 - 9:12 pm

Dear Zoe

Sorry for the inconvenience.
I have read another time the instructions and
guess that there is a difference betwee two hardware versions
wich my tr3 is V1.00 an I only need to upgrade to D 3.08
version wich is/was in the received file.

Thank you again.

73 Jan

Reply
Slava October 19, 2016 - 7:45 am

Hello Zoe,
May I get latest firmware for my RT3
FW D013.009
CP VER: V01.32

Thank you !
slavap75@gmail.com

Reply
October 21, 2016 - 8:52 am

ok

Reply
Jan Vdlinden
Jan Vdlinden October 19, 2016 - 8:27 pm

Dear Zoe

All went well and the TR3 is oke with the new firmware.

Thank You for the support.
I am very pleased with it.

73 Jan

Reply
October 20, 2016 - 4:35 pm

Glad to hear your good news ,sorry for the delay reply .Maybe you could join our Retevis Communication Club on Facebook.Our Radio Family–https://www.facebook.com/groups/142003839541558/

Reply
Emanuele REPETTO
Emanuele REPETTO October 19, 2016 - 8:52 pm

Hello, during the programming process, the software are aborted upload to radio.
Now, during programming radio, the software ask a password, but i don’t have set any password yet.
How i can solve this problem?

Reply
October 20, 2016 - 4:51 pm

Try 00000000

Reply
Emanuele REPETTO
Emanuele REPETTO October 19, 2016 - 9:18 pm

Sorry…my radio is Retevis RT8 GPS

Reply
Walter Fukc
Walter Fukc October 23, 2016 - 9:13 pm

Please send me new firmware. Version here is D002.34 CP 01.32
Thank you

Reply
October 25, 2016 - 2:22 pm

ok

Reply
Walter Fukc
Walter Fukc October 23, 2016 - 9:14 pm

Use RT3

Reply
October 25, 2016 - 2:22 pm

done

Reply
Walter Fukc October 25, 2016 - 9:02 pm

Hello Zoe,
thank you for the quick response

Walter

Reply
Kai October 28, 2016 - 6:19 pm

Hi,
can you send me a update for my RT3, i need the 1750.
Firmware: D002.034
CP : V01.32

73,Kai

Reply
October 31, 2016 - 8:47 am

done

Reply
Peter November 2, 2016 - 8:19 pm

I HAVE THE RETEVIS RT3 WITH
FIRMWARE D013.O14
CP VER V01.30
is this the latested update or is there an update you can send me please

Reply
November 4, 2016 - 2:00 pm

done

Reply
Peter November 4, 2016 - 9:18 pm

Zoo You have sent me the same one that’s already in the radio

Reply
November 8, 2016 - 8:52 am

Then nothing . For now we only update the firmware once , what i gave to you is the newest and only one firmware .

Reply
Fidi November 6, 2016 - 6:02 pm

DL1BBR
Hi zoe
i would like to have the newest Firmware for the RT3
my version: D002.034

Thank you in advance Fidi

Reply
November 8, 2016 - 8:53 am

done

Reply
Vic Loewen November 6, 2016 - 10:08 pm

Hello Not sure about Firmware update. What is the latest for RT3 HT My unit shows D002.034 & Vo1.32

Is it true that MD380 firmware is exactly the same for the RT3 … ??
What is the D013.020 firmware details ….Is that only for units with GPS installed.

Is you can clarifiy and send me the proper firmware to consider upgrading to !

Thank you
Vic

Reply
November 8, 2016 - 9:11 am

What i sent is the only and latest firmware for now .RT3 don’t have GPS function and why mention that ?
This only firmware is for fixing the white screen and add a 1750hz function .It clearly showed on blog and that’s all .

Reply
Roberto November 7, 2016 - 7:10 pm

Hi zoe,
I’m using RT8-GPS and it is a great radio.
My actual firmware is:
S013.014
CP ver. V01.36

Please Zoe, is there a newer firmware for my RT8-GPS?
Thank you

Reply
November 8, 2016 - 9:16 am

We only updated the firmware for once . For fixing white screen and adding a 1750hz function .

Reply
Roberto November 8, 2016 - 9:10 pm

Got it!
Many thanks, Zoe.

Reply
Leo November 13, 2016 - 5:56 am

Hello I am in a bit of a mess I have a Retevis RT3 but I dont know the vocoder as I updated before I seen what it was now my radio restarts and screen is upside down please help

thank you in advance
Leo

Reply
November 25, 2016 - 3:01 pm

You mean Font Reversed ? Sent you the guide and file already =)

Reply
Pietro Caregnato
Pietro Caregnato November 16, 2016 - 8:48 am

Hello,
I’m very satisfied about my new RT3. The firmware Ver is D013.014 and CP Ver is V01.32 .
Is there a new firmware for my radio? Thank you in advance.
Pietro

Reply
November 25, 2016 - 1:44 pm

done

Reply
Staf Van Hoecke
Staf Van Hoecke November 16, 2016 - 9:15 pm

First try…
Zoe, can you send me a copy of the latest firmware for my retevis rt3
my firmware version is D013.009
the CP ver is V01.32
If this is the latest version, pse send it anyway so that i can keep it safe ( for experimenting purposes)
Mni tnks

Staf

Reply
November 25, 2016 - 1:44 pm

done

Reply
Olli -
Olli - November 17, 2016 - 2:15 am

Hi Zoe,

Can I please have the RT3 firmware to upgrade from D.002.034 and CP V01.30 ?

Many Thx

Reply
November 25, 2016 - 1:43 pm

done.

Reply
Migel November 19, 2016 - 2:39 am

Hello, what is the difference between old Vocoder radios and new Vocoder radios?
better hardware, better range, better sound quality, better compatibility with mototrbo or something else?

Thanks

Reply
November 21, 2016 - 5:35 pm

No difference between the old and new , just choose the suited one according to your radio infors.

Reply
Dirk November 20, 2016 - 8:47 pm

Hi Zoe, do you have a new firmware for my RT8 VHF GPS ?
My firmware : S013.012
CP Ver. VO1.36
Best greetings
Dirk from germany

Reply
November 25, 2016 - 4:53 pm

The only file from official was sent to you .

Reply
Hrvoje November 26, 2016 - 4:00 am

Hello,

My retevis RT3 has Firmware Ver D002.034, CP Ver. V01.32. Please send me latest firmware.

Regards,

Hrvoje

Reply
December 1, 2016 - 1:45 pm

done

Reply
Dirk November 27, 2016 - 4:26 am

My Transceiver : RT8 VHF GPS

ok thank you very much.
Igot the firmware files.
But wich vocoder is my vocoder ?
Have i the new or the old vocoder ?
Wich file can i use ?

Best greetings
Dirk

Reply
December 1, 2016 - 1:45 pm

Yours suits the new vocoder,please read the blog.

Reply
Peter November 28, 2016 - 1:33 am

Hi Zoe, do you have a new firmware for my RT8 UHF GPS ?
My firmware : S013.020
CP Ver. VO1.36
Best greetings
Peter from Slovakia

Reply
December 1, 2016 - 1:46 pm

done

Reply
MANUEL CARDOSO
MANUEL CARDOSO December 1, 2016 - 7:28 am

Please send me
RT3 firmware to upgrade from D.002.034 V01.30
Best regards

Reply
December 1, 2016 - 1:46 pm

done

Reply
Peter December 1, 2016 - 10:37 pm

Hi Zoe,

which is newer firmware: S013.014 or S013.020?
RT8 UHF GPS
Peter

Reply
December 16, 2016 - 1:56 pm

S013.020 is the newer one .

Reply
Lu Per
Lu Per December 5, 2016 - 7:01 am

>”Hi Zoe, do you have a new firmware for my RT8 UHF GPS ?
>My firmware : S013.020
>CP Ver. VO1.36
>Best greetings
>Peter from Slovakia”

Hi Zoe,
please, I make the same request of Peter
regards
Lucio, from Rome-Italy

Reply
December 8, 2016 - 12:44 pm

done

Reply
dave December 5, 2016 - 9:04 am

Hi Zoe,
my rt3 firmware is D002.034. could i have the update please

thanks

Dave

Reply
December 8, 2016 - 12:44 pm

done

Reply
Jens December 7, 2016 - 4:14 am

Hi Zoe,

do you have a new firmware for my RT8 UHF GPS ?
My firmware : S013.020
CP Ver. VO1.36

BTW a great radio – well done!!!
Jens

Reply
December 8, 2016 - 12:50 pm

done

Reply
Francisco Frias
Francisco Frias December 7, 2016 - 9:29 pm

Hi.
I have 2 rt3, one in 2,034 and one in 13,009.
Please send me the latest firmware for these two models.
Thank you.

Reply
December 8, 2016 - 12:44 pm

done

Reply
Alex A
Alex A December 7, 2016 - 11:26 pm

Could I get the latest firmware for my RT8 VHF GPS?

Reply
December 8, 2016 - 12:44 pm

done

Reply
Bernd Böhnlein
Bernd Böhnlein December 8, 2016 - 8:33 pm

Hello Zoe,
thanks for the mail. My RT8 UHF GPS had before the update the firmware S013.020 and then S013.014. Is this correct or is this an older firmware?
Best regards
Bernd

Reply
December 16, 2016 - 1:41 pm

The firmware I give is the latest version , If you update by it ,then it is correct .

Reply
Migel December 12, 2016 - 2:26 am

Firmware for RT8 UHF GPS

thanks

Reply
December 13, 2016 - 11:41 am

done

Reply
Gabriele
Gabriele December 12, 2016 - 7:02 pm

Hi Zoe,
Please Could you send me the latest firmware for my RT8 VHF GPS?
My firmware : S013.020
CP Ver. V 01.36
Thank you,
Gabri

Reply
December 13, 2016 - 11:41 am

done

Reply
Alex A
Alex A December 13, 2016 - 3:20 pm

Could I get the program Tuner for my RT8?
For fine tuning squelch, power, deviation, frequency oscillator…

Reply
December 16, 2016 - 1:33 pm Reply
Fabio Pastori
Fabio Pastori December 13, 2016 - 10:44 pm

Can I have last firmware for my RT8, now is S013.014 – CP Ver. : V01.36

Thanks, Fabio

Reply
December 16, 2016 - 1:30 pm

Did you mean last or latest ??? Did you update before ?

Reply
Bernd Böhnlein
Bernd Böhnlein December 14, 2016 - 1:49 am

Hello,
Should I ask again after the current firmwares for my RT8 UHF GPS
unfortunately I have not received any.
Best regards
Bernd

Reply
December 16, 2016 - 1:30 pm

I sent by wetransfer

Reply
Anselmo December 15, 2016 - 6:51 pm

Hi Zoe,

Please could you send me the latest firmware for my RT8 VHF GPS?

Thank you,

Reply
December 16, 2016 - 1:29 pm

done

Reply
Aleksey Sukharev
Aleksey Sukharev December 16, 2016 - 9:19 pm

I have RT3 ver.2034 – 1.32 Send up-dating.
Where it is possible to receive the description of the RT3 Programming Software program?

Reply
December 19, 2016 - 4:05 pm Reply
Joost Meersschaert
Joost Meersschaert December 17, 2016 - 1:39 am

I have an issue with my Retevis RT8-VHF.
Menu not working any more. Can do nothing with the radio.
(CPS software version V01.36 MCU version S013.020)
Can someone help me?
Do I need new firmware?
I used the programming software V1.36 but nothing helps.
What do I wrong?

Reply
December 19, 2016 - 2:48 pm

Please download the latest firmware here : https://www.facebook.com/pg/retevis/offers/
Also the blog is updated ,too .Please read it again in case you wouldn’t miss out anything .

Reply
Peter Drescher
Peter Drescher December 17, 2016 - 6:53 am

Hi Zoe,
my new rt3 has firmware D002.034.
Could i have the update please

thanks
Peter

Reply
December 17, 2016 - 9:41 am

I’m organizing the latest Firmware Version . Later I will announce and give a link to download .

Reply
December 19, 2016 - 2:48 pm

Please download the latest firmware here : https://www.facebook.com/pg/retevis/offers/
Also the blog is updated ,too .Please read it again in case you wouldn’t miss out anything .

Reply
Dirk from Germany December 18, 2016 - 2:04 am

Dirk (RT8 VHF GPS)
Hello Zoe,
Is not it better to download the new firmware with changelog directly from your site?
I ask for new firmware for my RT8 VHF GPS.
My current firmware is S013.014
Thank you very much
Dirk

Reply
December 19, 2016 - 2:47 pm

Please download the latest firmware here : https://www.facebook.com/pg/retevis/offers/
Also the blog is updated ,too .Please read it again in case you wouldn’t miss out anything .

Reply
David Spain December 20, 2016 - 1:22 am

Hi Zoe,

I’m getting an error when visiting the website on Facebook’ page for getting the lastest firmware revision.

Agreed with Dirk from DE, could you guys please upload the file to your website??

Thanks so much
David

Reply
December 21, 2016 - 9:19 am

Done

Reply
David Spain December 22, 2016 - 8:03 pm

Received, downloaded and upgraded!!!

Everything works like a charm!

Thanks so much!
Great Support!
Take care!
David

Reply
December 23, 2016 - 8:42 am

Good to know .

Reply
Dirk from Germany December 20, 2016 - 3:16 pm

Thank you Zoe, but I have no Facebook-account. I can’t download the new firmware.
I miss a open download website for everyone.
Please send my the filelink to my e-mail.
Thank you.

Dirk

Reply
December 21, 2016 - 9:19 am

Done .

Reply
Harald December 24, 2016 - 1:55 am

hi zoe
How do I get the newest firmware for my RT8 GPS?
Facebook Link is down

vy 73 de DL8PX

Reply
Dardé December 24, 2016 - 4:40 am

Hi.
I haven’t facebook account. Could you send me the new firmware ? Thanks
Best regards

Reply
December 24, 2016 - 2:52 pm

Done

Reply
Harald December 25, 2016 - 5:52 am

hi
der link funktioniert nicht
es kommt
“Leider ist etwas schief gelaufen.

Wir arbeiten daran, dieses Problem so schnell wie möglich zu beheben.

Zurück
Facebook © 2016 · Hilfe ”

vy 73 de dl8px

Reply
December 26, 2016 - 8:57 am

Just search the Retevis on Facebook and then click offers . You will find it .

Reply
Dardé December 26, 2016 - 12:42 am

Hi. I’ve loaded the newest firmware for my RT-3 but unfortunately It haven’t fix the LCD crash (white screen where I’d to turn-off/n the radio). What can I do to fix this problem ? Thanks.

Reply
December 28, 2016 - 11:39 am

So how long have you kept your radio and where did you buy it , if you can’t fix it by yourself ,please contact your seller to send back our factory to help .

Reply
February 24, 2017 - 1:30 pm

I sent you a latest version 20170224,pls have a try again

Reply
Alessandro Bellucci
Alessandro Bellucci December 26, 2016 - 6:31 pm

Hi Zoe, I have a Retevis RT3 (without GPS) where I installed the MD380Tools as you can see in this picture: http://digilander.libero.it/on_the_air/20161226_112125edit.jpg

The new firmware is compatible with Tools? I can install it without problems? Thanks, greetings and Merry Christmas!

I5EKX Alex.

Reply
December 28, 2016 - 10:19 am

No, they are not compatible .

Reply
Harald December 27, 2016 - 5:52 am

hi zoe
ich habe kein facebook account. deshalb kann ich die datei nicht herunterladen.
schicke mir die datei bitte per e-mail. vielen dank
harald

Reply
December 28, 2016 - 10:33 am

done

Reply
Stephan December 28, 2016 - 12:54 am

Hello Zoe Chen,
the facebook-Link does not work for me either.
May i have a direct download link?
I use a RT8-GPS with FW Version S.013.014
Thank You,
Stephan

Reply
December 28, 2016 - 10:33 am

done

Reply
Stephan December 28, 2016 - 7:16 pm

Thank You.
Everything worked fine.

Stephan

Reply
Retevis
Retevis December 29, 2016 - 3:56 pm

Great, Congratulations!

Reply
Peter Miethig December 31, 2016 - 12:28 am

hello,
i am no member of FACEBOOK.
my RT3 Version is D002.034
Please send me Firmwareupdate or link,
thanks a lot

Reply
January 3, 2017 - 4:31 pm

ok

Reply
Sebastian December 31, 2016 - 7:51 am

WHY ? can i only download the latest Firmware for Retevis RT3 on Facebook ?
I dont have Facebook.
My Firmware : D002.034
CP Ver. : V01.32
Can you send it to my E-Mail ?

Sebastian

Reply
January 3, 2017 - 4:31 pm

ok

Reply
Chris G4HYG January 3, 2017 - 8:01 pm

Hello Zoe,
I don’t use Facebook so I cannot download the firmware update.
My RT3 has firmware D013.014 and the CP is v01.32.
Can you send me the updated firmware please?
Regards,
Chris

Reply
January 4, 2017 - 10:36 am

ok

Reply
Peter Bachmann January 3, 2017 - 11:08 pm

Hello Zoe,

I am not at Facebook. How can I get the firmware for rt8 with white screen?

Kind regards

Peter

Reply
January 4, 2017 - 10:36 am

ok

Reply
Dirk January 4, 2017 - 4:37 pm

Dirk from Germany (RT8 VHF GPS, 13.32)

Hi Zoe, I have a few suggestions for improvement.
A current problem is that the warning tone volume can not be changed.
It would be good if at least 2 or 3 volumes were possible.
But also the display brightness should be adjustable. It’s just too light in the dark.
The firmware of the devices should be freely downloaded on a website.
Not everyone has a Facebook account.
Together the project can be improved.
Maybe you will pass these suggestions to the programmers.
Thank you for your attention.
Would you please send me the latest firmware for my RT8 VHF GPS?
Thank you very much.
Dirk from Germany

Reply
January 5, 2017 - 4:43 pm

You are the first one give that Suggestions 1 & 2 , I already feedback to Factory . About Firmware Download , I have to say that I take charge Facebook Page and I think it is more convenient to support help /news/ activities /special offers and so on . So I wanna guide people here to have fun together . Also you know that is not everyone need that Firmware ,and If people ask for it ,I’ll definitely give that to them , so I guess that’s ok ? Thanks for your sincere suggestions .

Reply
Chris G4HYG January 4, 2017 - 5:53 pm

Thank you, Zoe.

Reply
Dirk January 6, 2017 - 1:10 am

Thank you Zoe for your feedback to factory. And thank you for the newest firmware.
Have a nice day.
Dirk from Germany

Reply
Joerg January 11, 2017 - 2:55 am

Dear Zoe,
May I get the latest firmware for the RT3 by e-mail, please? I never use Facebook.
My current firmware is D002.034 and CP V01.30.
Is a new alignment of the rf and audio parameters required after the upgrade? Where are these alignment values (soft-pots) stored? And is a software available for such alignment?
Best regards from Germany
Joerg

Reply
January 13, 2017 - 2:13 pm

done

Reply
Sigi Sigi
Sigi Sigi January 11, 2017 - 2:55 am

Dear Zoe

Would you please send me the latest firmware for my RT8 VHF GPS?
Thank you very much.
Sigi from Germany

Reply
January 13, 2017 - 2:13 pm

done

Reply
Mauro January 11, 2017 - 4:57 pm

Hi Zoe, the suggestions from Dirk are correct, I’ve heard more than one user complaining for the fixed alert tones volume (end of transmission, talk permit, etc…). It would be great to have a hi, mid, low volume and maybe some alert tones be regulated by the master volume (if the volume knob is set to zero also alert tones are zero).
Another suggestion would be to add more menù items to individually set on or off the alert tones, so you can choose what tones to hear (today only some of them can be set on/off individually).

Thanks for your help! Mauro IW3ROW

Reply
January 13, 2017 - 2:15 pm

Thanks for your feedback ,too . With your suggestion , maybe the next radio will be the better one .

Reply
Ivo January 12, 2017 - 10:58 pm

Hello Zoe
I haven’t facebook account. Would you send me the newest firmware ? Thank you.
Best regards
Ivo

Reply
January 13, 2017 - 2:12 pm

done

Reply
Sigi Sigi
Sigi Sigi January 13, 2017 - 3:02 pm

Hello Zoe
thanks for sending of firmware to my.
greetings and happy new year

sigi

Reply
Steven Shepherd
Steven Shepherd January 14, 2017 - 4:51 am

Where can I get a copy off Firmware Ver:D013.014 CP Ver:V01.32
I had white screen so I updated to the new firmware and all I get now is My Name and Call-sign. So please let me know where I can get the old ver so I can get back up and running on DMR.

Many Thanks: Steven

Reply
January 16, 2017 - 11:12 am

RT3 or RT8 ?

Reply
Steven Shepherd
Steven Shepherd January 18, 2017 - 4:31 am

It is for the Retevis RT3. Please help me get my radio up and running as I miss it and only used it for a short while.
Many Thanks: Steven.

Reply
January 19, 2017 - 4:26 pm

If you can not set it by yourself ,please contact your seller to send it back to factory and get a new one .

Reply
Steven Shepherd
Steven Shepherd January 20, 2017 - 5:12 am

I can set it up but the firmware that you send was for the RT8 and it came out back to front as if it was in some other language.
But I will look at it again.

Many Thanks: Steven.

January 20, 2017 - 9:03 am

I apologize ,now I just send you all . Please have a check about it .

February 24, 2017 - 1:27 pm

Hello ,we updated the firmware to 20170224 version , and added a new RT3 without GPS new vocoder ,please have a try again .

Reply
Alex A
Alex A January 22, 2017 - 5:46 pm

Please send me the latest firmware for my RT8 VHF GPS

Reply
February 8, 2017 - 1:59 pm

done

Reply
GM4JJJ January 24, 2017 - 7:22 pm

Please can I have the latest firmware for my RT8 GPS which currently has S013.020 V01.36

Reply
February 8, 2017 - 1:59 pm

done

Reply
Dirk January 26, 2017 - 2:04 pm

Dirk from Germany (RT8 VHF GPS, 13.32)
Hi Zoe,
where can I find out which firmware version for my RT8 VHF GPS is current?
I do not have a Facebook account.
If there is a newer than the 13.32, then send it to me via email too.
Thank you very much.

have a nice day
Dirk from Germany

Reply
February 8, 2017 - 1:55 pm

Yours is already the newest .

Reply
BRUNO MERCIER
BRUNO MERCIER February 4, 2017 - 4:21 am

Good evening I have just bought the retevis rt3 GPS my I little not to register(record) the frequencies with my pc Windows 8 when I my the cable of programming he(it) my mark(brand) error the model is wrong wrong had you a solution my version of my firmware and S013.032 cp worm v01.36 thank you for helping me.

Reply
February 10, 2017 - 1:49 pm

you don’t have to update the firmware , it is already the newest one .

Reply
Marco February 12, 2017 - 10:33 pm

Good Morning.
I’ve just purchased a new RT3 and I think I need the new firmware because my RT3 shows D013.009.

Thanks.

Reply
February 13, 2017 - 8:26 am

Done

Reply
Marco February 13, 2017 - 3:39 pm

Hy Zoe,
thanks for the new firmware but I have a problem.
After the upgrade I got a blank screen. I had to find an old version to get the radio up again.

I don’t know what was wrong.

Best regards
Marco

Reply
February 14, 2017 - 9:54 am

What did you choose ? new vecoder or old vecoder ?

Reply
Marco February 14, 2017 - 3:20 pm

I tried both but I think new vecoder is the correct choice.

Reply
February 16, 2017 - 1:23 pm

please try what I sent to you .

Reply
February 24, 2017 - 1:24 pm

Hello ,we updated the firmware to 20170224 version , and added a new RT3 without GPS new vocoder ,please have a try again .

Reply
Gerhard February 16, 2017 - 5:29 pm

Hello,
I just got my new RT-8 (no GPS) and do experience some difficulty by writing a new code plug onto the device.
While the OS on my PC is WIN10 and the hardware is 64bit, USB driver ia64x is not accepted. Instead, I tried the 86x driver which does at least not provide an error message. Still, I am not sure if the USB driver was really installed correctly. Because, every time I connect my RT-8 to write the code plug the USB port seems to change. Now, the situation is as follows: When switching he RT-8 on there is a message that the RT-8 is not programmed any more. In fact, in the menu I can only find “Zone”.
Questions:
1. Do you have an updated USB driver version for WIN10 systems (64bit)? – Please send me the latest USB driver for my system which a description how to install. As it appears critical, maybe the description also tells me how plug and unplug the RT-8 for programming.
2. Is there a way to reset the RT-8? – Please provide a description.
3. Would you please send me the latest RT-8 (w/o GPS) firmware and a description how to manage the upgrade? – I do not have a Facebook account though.
Thanks for your kind response.
Best regards, Gerhard

Reply
February 20, 2017 - 1:33 pm

1.The software and USB driver are all in our website — http://www.retevis.com/resources-center/
2. I could support the factory default data if you mean this .
3. This blog is telling the whole description of updating firmware , where didn’t you understand ? The firmware was sent to you already .

Reply
Chris February 24, 2017 - 8:46 pm

Hi,

I have a RT3, non-GPS, UHF.
Where can I find the latest firmware?

Thank you,
Chris

Reply
February 27, 2017 - 10:33 am

Now you could check your mail .I just sent to you .

Reply
S56llb April 6, 2017 - 3:20 am

Hello Mrs. Chen,
thank you for the RT3-update – the new firmware works good.
Today I’ve got the RT8 with GPS and the firmware S013.020, CP Ver. V01.36.
Can you also send me the latest firmware and software updates for
this Radio?

Reply
April 11, 2017 - 9:36 am

done

Reply
Marco April 12, 2017 - 4:16 am

Hi Zoe,
would you please send me the ew RT3 noGPS firmware?

Thanks
Marco

Reply
April 12, 2017 - 9:27 am

Done

Reply
Antonello April 15, 2017 - 3:25 pm

RT8 fw:S013.009 CP:V01.36
Please, can you send me the last firmware?
Many thanx

Reply
April 15, 2017 - 3:41 pm

For fixing the Admit Criteria or fixing blank screen ?

Reply
Joachim April 15, 2017 - 6:09 pm

Hi Zoe

Please send me the latest software and firmware for my RT8.

S/N:1602RT802xx
Tanks

Reply
April 17, 2017 - 11:03 am

For fixing the Admit Criteria or fixing blank screen ?

Reply
Nuno May 26, 2017 - 4:24 am

Will you have v13.34 firmware available anytime soon fixing Admit Criteria?

Reply
Ailunce
Ailunce May 27, 2017 - 10:43 am

Sorry,there is no v13.34 firmware.

Reply
Christian May 31, 2017 - 11:01 pm

Dear Retevis Team
Please be so kind and provide an answer for these following questions:
1) Please send me the newest firmware for my Retevis RT8 GPS
2) My Keypad is not working since last new programming using your software tool. Key lock is not the issue, why it dos not accept any pushes. Battery change, on / off, etc didn´t bring any changes. Do you have any idea? Maybe the firmware upgrade can help?

Thank you very much
Chris

Reply
Ailunce
Ailunce June 1, 2017 - 10:08 am

Hello, please check your radio is new vocoder or old vocoder. S0xx.0xx means GPS with new vocoder,S00x.xxx means GPS with Old vocoder. then download the firmware.
https://www.dropbox.com/s/4mco0wcyusw1qkx/RT8Firmware20170224.rar?dl=0
Thanks

Reply
Tsarev Pavel
Tsarev Pavel June 17, 2017 - 3:42 am

Please send me the latest firmware for my Retevis RT8 without GPS

Reply
Ailunce
Ailunce June 17, 2017 - 9:49 am

We have send it to your email,please check your email.

Reply
complete profit code system June 20, 2017 - 4:25 am

Hi there it’s me, I am also visiting this site
daily, this site iss truly nice and the people are actually sharing good thoughts.

Reply
Ailunce
Ailunce June 20, 2017 - 6:34 pm

Hello,
Thanks for your support to us.
Have a good day.

Reply
andrew davis June 20, 2017 - 10:43 pm

would you please send me the ew RT3 noGPS firmware?

Reply
Ailunce
Ailunce June 21, 2017 - 10:39 am

have send to your email. plesse check it.
thanks

Reply
Óscar Ramirez June 22, 2017 - 11:15 am

Dear team of RETEVIS Developers. E seen very pleased the new Youtube videos, how to: update firmware RT8 and the new equipment RT82. Thank you for keeping the customers respectful and up to date. At this moment I wish to help me and send to my email the latest firmware of the RT8 without GPS of VHF. thank you very much. I will be aware of your valuable collaboration and help. Att Oscar Ramirez

Reply
Ailunce
Ailunce June 22, 2017 - 11:51 am

Hello,What your RT8 vocoder version? But if your radio is good and I do not recommend you to upgrade.

Reply
iw2ngg June 28, 2017 - 9:10 pm

I too would need latest firmware version for the rt3 (no-gps), too.
And the latest programming software if possible.

Thanks

Reply
Ailunce
Ailunce July 1, 2017 - 6:01 pm

Please tell us your firmware version so that i can send you the right laest firmware.

Reply
iw2ngg July 3, 2017 - 9:00 pm

D13.020

Thanks

Reply
Ailunce
Ailunce July 4, 2017 - 10:09 am

check your email, i have send the firmware to your email.

Reply
JCG January 19, 2018 - 3:21 am

Hi,
My RT3 has CP Ver. V01.30. Is there a newer version?
73

Reply
Ailunce
Ailunce January 19, 2018 - 8:49 am

No new version for RT3. We will release on our facebook page if there have update version.
Thanks!

Reply
Michael Langford October 25, 2019 - 12:10 pm

I am going to purchase an RT-3 UHF GPS model but, more looking at the RT-8 UHF GPS IP67. Do both radios take the same firmware and also support “promiscuous” mode?

Thanks

Reply
Juan Sebastián February 15, 2020 - 7:19 am

hola,
me he equivocado actualizando el firmware de mi Retevis RT3 y le he cargado el del RT3s. La pantalla está completamente en negro. Se puede recuperar el equipo?. Si es así me podrían enviar el firmware?
Saludos

Reply
Cherry
Cherry February 17, 2020 - 8:36 am

hi, we are so sorry for this, would you please check if your radio is the old vocoder or new vocoder. the way to check it: open your radio-check menu-utilities-radio info-versions
now if you can’t open your radio, you can try two vocoders(old and new) one by one, to check which one is ok for your radio.
you can download the firmware from our website page here: https://www.retevis.com/resources_center/software/RT3_Firmware_14.04.zip

if any question, please let me know!

Reply
Rob Gillies February 21, 2020 - 11:20 pm

Greetings
I have two rt3s-gps, # 1: is updated Firmware Ver: P018.011 and CP Ver: V01.05
# 2: is updated Firmware Ver: P018.011 and CP Ver: V01.12
I have same codeplugs in each and updated the firmware in each but can’t find if there is new “CP” files for the radios
Can I make the two radios sam CP Ver: V01.12???

Thanks

Reply
graham williams April 16, 2020 - 7:49 am

hi just upgraded firmwareon rt3 now all i get is the screen flashing on and off any ideas or fixes many thanks graham

Reply
Cherry
Cherry April 16, 2020 - 10:58 am

hi, please check if you upgrade the right firmware, usually if you choose the wrong firmware, will meet this problem

Reply
Graham Williams April 21, 2020 - 5:41 am

Hi all I get now is retevis rt3 on the screen. I also tried the factory reset file and nothing many thanks

Reply
Cherry
Cherry April 22, 2020 - 9:50 am

hi, here we still suggest you check your RT3 version, then use the right firmware to update.

Reply
Marco Brusa June 5, 2020 - 8:23 pm

Hi
After flashing with latest firmwareI have big problem with my RT3 UHF Radio.
Please send me original Firmware Ver. D002.034 and codeplug editor ver V01.30
Thanks in advance for your support
Marco IU1NCL

Reply
Cherry
Cherry June 9, 2020 - 4:43 pm

Hi, sent to your email, but for the software, now the version is V1.35

Reply
Ladell February 11, 2021 - 1:52 pm

I have an RT8 with Firmware D013.020 and CP Ver V01.36. Is this the latest available for my radio. If not please advise or send. Thanks

Reply
Matthew April 3, 2021 - 6:57 am

Please if you are able can you send me the latest firmware and user database for my RT3.

Many thanks in advance.

Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy